S&A Industrial chiller expert16 years experience in chiller research, development, manufacture and sale
ROHSCEISOREACH
Email:marketing@teyu.com.cnTel:+86-20-89301885
laser marking machine water chiller
Current location: HomeNews Center » News Center » Cases » A Korean manufacturer wishes to purchase S&A CW-5000 water chiller to cool their CNC laser cutting machine and CNC engraving machine

Recommended Products

Water chiller CWFL-6000 for 6000W fiber laser
Water chiller CWFL-6000 for 6000W fiber laser
S&A high power refrigeration industrial water chiller CWFL-6000 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co., Ltd.CWFL-6000 chiller is special applied for cooling 6000W fiber laser.S&A CWFL series chiller is special for cooling Raycus,IPG,Max,nLIGHT,trumpf,Rofin and SPI fiber laser.
Chiller CW-5200 1400W cooling capacity
Chiller CW-5200 1400W cooling capacity
S&A CW-5200 is refrigeration type industrial water chiller of 1400W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There are 2 specifications as 1 water outlet/inlet and dual water outlet/inlet, applicable to cool single laser glass tube.
Chiller CW-5000 800W cooling capacity
Chiller CW-5000 800W cooling capacity
S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.
Water chiller CWFL-3000 for 3000W fiber laser
Water chiller CWFL-3000 for 3000W fiber laser
S&A compressor refrigeration industrial water chiller CWFL-3000 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co., Ltd.CWFL-3000 chiller is special applied for cooling 3000W fiber laser.S&A CWFL series chiller is special for cooling Raycus,IPG,Max,nLIGHT,trumpf,Rofin and SPI fiber laser.
CWUL-10 water chiller for 8W-15W UV laser
CWUL-10 water chiller for 8W-15W UV laser
S&A CWUL-10 is refrigeration type industrial water chiller of 800W cooling capacity, it is applied for cooling 8W-15W UV laser. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted.
chiller CW-7300 9600W cooling capacity
chiller CW-7300 9600W cooling capacity
CW-7300 is dual temperature and dual control type of water chiller, mainly applied to cool 1000Watt fiber laser machine. CW-7300 water chiller has 2 temperature control modes as constant temperature and intelligent temperature control. The water temperature can be adjusted. It is able to cool fiber device and lens at the same time, multiple use for saving space and manual move, quite convenient for the user.
Chiller CW-6100 4200W cooling capacity
Chiller CW-6100 4200W cooling capacity
S&A CW-6100 series is high-precision compression refrigeration small water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control.
Water chiller CWFL-1000 for 1000W fiber laser
Water chiller CWFL-1000 for 1000W fiber laser
S&A air cooled industrial water chiller CWFL-1000 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co., Ltd. Our brands"S&A" and "TEYU" have gained approval and trust from thousands of manufacturer at home and abroad which enables our product export rate maintained at over 60% in long-term.S&A CWFL series chiller is special for cooling Raycus,IPG,Max,nLIGHT,trumpf,Rofin and SPI fiber laser.

Top articles

Latest articles

Your browsing history

    Loading...

A Korean manufacturer wishes to purchase S&A CW-5000 water chiller to cool their CNC laser cutting machine and CNC engraving machine

Categories: CasesStars: 3Stars Visit: - Release time: 2017-09-19 22:29:00
RSS subscription Font size:【 Large Middle Small Source: www.teyuchiller.com Editor: chiller Author: S&A

Lots of CNC equipment must be operated with water chiller. This time, the Korean customer wants to know more about S&A CW-5000 water chiller.
It's well known that it's very cold and even snows in Korea in winter. The Korean customer has mentioned that the CNC spindle water chiller is unable to start due to the extremely low temperature (or the freezing of cooling water) in the chilly winter. Then they asked if water could be replaced by antifreeze as the cooling medium in winter. Our answer is: Absolutely not! However when antifreeze is used as the cycling medium, it must be diluted strictly according to a certain proportion to avoid the damage on the internal components of water chiller caused by the corrosion effect of antifreeze. But when it gets warmer and water doesn't freeze, make sure to drain water from the water tank and replace it with purified water.
This Korean customer, who is mainly engaged in the production of the following equipment, including CNC engraving machine, CNC laser cutting machine, CNC plasma machine and acrylic polishing machine with an annual production of about 400 sets, asked for the cooling solution for 2+2 series wound four-axis engraving machine from S&A.
This Korean customer has said wittily that we should have known each other earlier and lots of knowledge about the operation of water chiller has been learned.
For the center of an industrial water chiller---condenser, S&A has invested millions of money in the equipment for the production and made strict control on a series of processes, including fins, bends and welding etc to secure the quality of condenser. Meanwhile, with the introduction of welding robots, the welding procedure has been significantly improved and perfected, which also has efficiently prevented the machinery breakdown caused by solder skips to better secure the stable quality of S&A water chiller. With the introduction of IPG fiber laser cutting machine for the cutting of external metal plates on the water chiller and the punching of holes on the machine parts, it has not only improved the work efficiency and technology, but also enhanced the appearance of S&A water chillers.
The technical parameter of C-5000: http://www.teyuchiller.com/Products/ChillerCW5000800Wcoo.html

A Korean manufacturer wishes to purchase S&A CW-5000 water chiller to cool their CNC laser cutting machine and CNC engraving machine