S&A Indutrial chiller expert12 years experience in chiller research, development, manufacture and sale
ROHSCEISO
Email: marketing@teyu.com.cnTel: +86-20-89301885
laser marking machine water chiller
Current location: HomeNews Center » News Center » Cases » Cold water machine is used for cooling the dispensing machine UVLED lamp

Recommended Products

Chiller CW-5000
Chiller CW-5000
S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.
Chiller CWFL-1500
Chiller CWFL-1500
S&A CWFL-1500 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CW-6200
Chiller CW-6200
S&A chiller CW-6200 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CW-3000
Chiller CW-3000
S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted.
Chiller CWFL-1000
Chiller CWFL-1000
S&A CWFL-1000 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CWFL-500
Chiller CWFL-500
S&A CWFL-500 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CW-5300
Chiller CW-5300
S&A chiller CW-5300 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CW-6000
Chiller CW-6000
S&A chiller CW-6000 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.

Top articles

Latest articles

Your browsing history

    Loading...

Cold water machine is used for cooling the dispensing machine UVLED lamp

Categories: CasesStars: 3Stars Visit: - Release time: 2013-11-30 14:38:00
RSS subscription Font size:【 Large Middle Small Source: Editor: Author:

The main customers for the keys of the mobile phone battery package dispensing, mobile phone, notebook battery package, computer speaker / receiver, coil dispensing and other electronic products, cold water machine procurement for cooling dispenser machine UVLED light bulb. Because the UV-LED lamp emit ultraviolet radiation at the same time, it will produce a lot of heat, so that the machine body temperature increases, so the need of chiller beside cooling, can make sure that the UV-LED lamp can work normally, and at the same time, also can prolong the life of UV-LED light.

The required cooling led type two: 320 beads (each 5W) and 64 beads (each 3W), according to the customer the UV-LED lamp heat size, I recommend to clients of the CW-5200AI cooling 320 beads, and CW-3000AF two chiller cooling 64 beads.

Cooling capacity of CW-5200AI reached 1400W, which belongs to the refrigeration type cold water machine, can carry out temperature control, constant temperature and intelligent temperature control and has two working modes, intelligent temperature control mode can change with temperature and adjust to the corresponding temperature, a key to the unhappy solution, customers do not have to worry about problems of adjustment and seasonal temperature; while CW-3000AF belongs to the cooling chillers, not for temperature control, its main function is to heat and air equipment for heat exchange, the temperature and the environment, but the CW-3000AF cold water machine, high quality and low price, small power equipment cooling optimal selection.