S&A Indutrial chiller expert12 years experience in chiller research, development, manufacture and sale
ROHSCEISO
Email: marketing@teyu.com.cnTel: +86-20-89301885
laser marking machine water chiller
Current location: HomeNews Center » News Center » Cases » Cooling the 55W RF tube used for water cooling machine

Recommended Products

Chiller CW-5200
Chiller CW-5200
S&A CW-5200 is refrigeration type industrial water chiller of 1400W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There are 2 specifications as 1 water outlet/inlet and dual water outlet/inlet, applicable to cool single laser glass tube.
Chiller CWFL-500
Chiller CWFL-500
S&A CWFL-500 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CWFL-1000
Chiller CWFL-1000
S&A CWFL-1000 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CW-3000
Chiller CW-3000
S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted.
Chiller CW-5300
Chiller CW-5300
S&A chiller CW-5300 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CW-6200
Chiller CW-6200
S&A chiller CW-6200 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CW-6000
Chiller CW-6000
S&A chiller CW-6000 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CW-5000
Chiller CW-5000
S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.

Top articles

Latest articles

Your browsing history

    Loading...

Cooling the 55W RF tube used for water cooling machine

Categories: CasesStars: 3Stars Visit: - Release time: 2013-11-30 16:16:00
RSS subscription Font size:【 Large Middle Small Source: Editor: Author:

In November 1st, Dongguan received a customer calls Advisory chiller. The client is designed to do high speed embroidery machine, embroidery machine 55W RF cooling inside the tube for water cooling machine procurement. RF tube is an important component of embroidery machine operation, RF tube is easy to generate high temperature in the working process, so the need for chiller beside cooling, if there is no water chiller for cooling, is likely to result in the RF tube burst due to high temperature, so the RF tube to be scrapped, use and choose suitable chiller can better protection of RF tube
Special domain is specializing in the production of cold water machine company, after more than ten years development, special domain chiller with refrigeration advanced technology, stable quality advantages, gradually become a standard product batch module production.
According to the customer demand, I give customers select the cooling capacity of 1400W chiller (CW-5200AI), CW-5200AI belongs to the refrigeration type cold water machine, can carry out temperature control, constant temperature and intelligent temperature control and has two working modes, intelligent temperature control mode can change with temperature and adjusting to the corresponding temperature, a key solution thousand sorrow, customers don't have to worry about problems of adjustment and seasonal temperature