S&A Indutrial chiller expert12 years experience in chiller research, development, manufacture and sale
ROHSCEISO
Email: marketing@teyu.com.cnTel: +86-20-89301885
laser marking machine water chiller
Current location: HomeNews Center » News Center » Hot News » Engraving machine spindle special chillers case

Recommended Products

Chiller CW-3000
Chiller CW-3000
S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted.
Chiller CWFL-1000
Chiller CWFL-1000
S&A CWFL-1000 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CW-6200
Chiller CW-6200
S&A chiller CW-6200 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CW-6000
Chiller CW-6000
S&A chiller CW-6000 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CWFL-1500
Chiller CWFL-1500
S&A CWFL-1500 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CW-5000
Chiller CW-5000
S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.
Chiller CW-5200
Chiller CW-5200
S&A CW-5200 is refrigeration type industrial water chiller of 1400W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There are 2 specifications as 1 water outlet/inlet and dual water outlet/inlet, applicable to cool single laser glass tube.
Chiller CWFL-800
Chiller CWFL-800
S&A CWFL-800 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.

Top articles

Latest articles

Your browsing history

    Loading...

Engraving machine spindle special chillers case

Categories: Hot NewsStars: 3Stars Visit: - Release time: 2013-12-02 09:32:00
RSS subscription Font size:【 Large Middle Small Source: Editor: Author:

Special domain cold water machine is widely used in the spindle of engraving machine, welding machine spindle cooling, refrigeration effect chillers, characteristics of stable operation of the spindle, highly recognized industry users, the following share chiller for cooling carved machine tool spindle case
Today, Dongguan received a customer calls Advisory spindle with cold water machine, the customer is carved machine, according to the clients technical parameters: 1 heads 2.2KW spindle, 40000 speed, we give customers select CW-5000AF the refrigeration capacity of 800W chiller.
Cold water machine structure domain production of compact, small volume, convenient to move. The most popular with the customers is the intelligent temperature constant temperature and two kinds of work modes, cold water machine intelligent temperature control mode can change with temperature and adjust to the corresponding temperature, a key to the unhappy solution, customers do not have to worry about problems of adjustment and seasonal temperature.
Special domain chillers have passed ISO9001, CE certification and ROSH certification, belongs to the green environmental protection product, the production process is fully using batch module production standards, each finished product are all through the strict quality inspection checks, this is a special field to give customers a choice to ensure confidence.