S&A Indutrial chiller expert12 years experience in chiller research, development, manufacture and sale
ROHSCEISO
Email: marketing@teyu.com.cnTel: +86-20-89301885
laser marking machine water chiller
Current location: HomeNews Center » News Center » S&A Factory » S&A compressor water chiller CW-6200 for pipe metal fiber laser cutter

Recommended Products

Chiller CW-6200
Chiller CW-6200
S&A chiller CW-6200 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CWFL-1000
Chiller CWFL-1000
S&A CWFL-1000 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CW-3000
Chiller CW-3000
S&A CW-3000 series thermolysis type water cooler has compact design,with energy saving,high cost performance,good protection and alarm system. It’s mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature of cw-3000 cooler is related to ambient temperature, so it's thermostat is not manually adjusted.
Chiller CWFL-500
Chiller CWFL-500
S&A CWFL-500 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CWFL-800
Chiller CWFL-800
S&A CWFL-800 water chillers, specially designed for cooling fiber lasers, are characterized by dual circulating refrigeration system and dual temperature control system. The CWFL series water chillers are so multi-functional that the laser device and the QBH connector/optics can be cooled by the low temperature control system and the high temperature control system respectively at the same time, which can greatly reduce the generation of the condensed water and save cost.
Chiller CW-6100
Chiller CW-6100
S&A chiller CW-6100 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.
Chiller CW-5000
Chiller CW-5000
S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.
Chiller CW-5300
Chiller CW-5300
S&A chiller CW-5300 has 2 temperature control modes as constant temperature and intelligent temperature control mode. Generally speaking, the defaulted setting for the temperature controller is intelligent temperature control mode. Under intelligent temperature control mode, the water temperature will adjust itself according to the ambient temperature. However, under constant temperature control mode, users can adjust the water temperature manually.

Top articles

Latest articles

Your browsing history

    Loading...

S&A compressor water chiller CW-6200 for pipe metal fiber laser cutter

Categories: S&A FactoryStars: 3Stars Visit: - Release time: 2018-09-29 14:36:00
RSS subscription Font size:【 Large Middle Small Source: www.teyuchiller.com Editor: S&A chiller Author: S&A

S&A compressor water chiller CW-6200 for pipe metal fiber laser cutter 

S&A water chiller