S&A Industrial chiller expert16 years experience in chiller research, development, manufacture and sale
ROHSCEISOREACH
Email:marketing@teyu.com.cnTel:+86-20-89301885
laser marking machine water chiller
Current location: HomeNews Center » News Center » FAQ » What happened if the circulating water is gone after being filled in the water chiller which cools spindle engraving machine?

Recommended Products

Chiller CW-6000 3000W cooling capacity
Chiller CW-6000 3000W cooling capacity
CW-6000 series industrial water chiller of 3000W cooling capacity is produced by Guangzhou Teyu Electromechanical Co., Ltd. It can be used to cool high-power lasers and high-speed spindles, etc. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control
Water chiller CWFL-6000 for 6000W fiber laser
Water chiller CWFL-6000 for 6000W fiber laser
S&A high power refrigeration industrial water chiller CWFL-6000 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co., Ltd.CWFL-6000 chiller is special applied for cooling 6000W fiber laser.S&A CWFL series chiller is special for cooling Raycus,IPG,Max,nLIGHT,trumpf,Rofin and SPI fiber laser.
Chiller CW-6300 8500W cooling capacity
Chiller CW-6300 8500W cooling capacity
S&A CW-6300 series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. Features 1. 8500W cooling capacity; optional environmental refrigerant; 2.±1? precisely temperature control;
Water chiller CWFL-800 for 800W fiber laser
Water chiller CWFL-800 for 800W fiber laser
S&A industrial water chiller CWFL-800 with dual temp control function is produced by Guangzhou Teyu Electromechanical Co., Ltd. CWFL-800 chiller is special applied for cooling 800W fiber laser.S&A CWFL series chiller is special for cooling Raycus,IPG,Max,nLIGHT,trumpf,Rofin and SPI fiber laser.
Chiller CW-5000 800W cooling capacity
Chiller CW-5000 800W cooling capacity
S&A CW-5000 is refrigeration type industrial water chiller of 800W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There is 1 water outlet and an inlet, applicable to cool single laser glass tube.
Chiller CW-7500 14KW cooling capacity
Chiller CW-7500 14KW cooling capacity
S&A CW-7500 remote control series is high-precision compression refrigeration small water chiller,available for remote control,with intelligent temperature control,completed configuration,perfect protection and alarm system. Features 1. 14.5KW cooling capacity; optional environmental refrigerant; 2. ±1? precisely temperature control;
Chiller CW-5300 1800W cooling capacity
Chiller CW-5300 1800W cooling capacity
1. 1800W cooling capacity; optional environmental refrigerant; 2. ±0.3? precisely temperature control; 3. The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
Chiller CW-6200 5100W cooling capacity
Chiller CW-6200 5100W cooling capacity
S&A CW-6200 series is high-precision compression refrigeration small water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. Features 1. 5100W cooling capacity; optional environmental refrigerant; 2. ±0.5? precisely temperature control;

Top articles

Latest articles

Your browsing history

    Loading...

What happened if the circulating water is gone after being filled in the water chiller which cools spindle engraving machine?

Categories: FAQStars: 3Stars Visit: - Release time: 2018-07-07 09:20:00
RSS subscription Font size:【 Large Middle Small Source: www.teyuchiller.com Editor: S&A chiller Author: S&A

If the circulating water is gone after being filled in the water chiller, there might be a leaking problem. The leaking problem may be due to the following reasons:

1. The water inlet or outlet is broken or becomes loose;
2. The water supply inlet becomes loose;
3. The internal water tank is broken;
4. The drain outlet is broken;
5. The internal water pipe is broken;
6. The internal condenser has leakage point;
7. The cap of the drain outlet is broken or becomes loose;
8. There is too much water inside the water tank and the water spills out when the water chiller is operating;
9. The external water pipe is broken or the pipe size doesn’t match the inlet/outlet.
 
For the above 1-6 reasons of leaking, you can contact S&A after-sales department by dialing 400-600-2093 ext. 2 for technical support.
 
In respect of production, S&A has invested the production equipment of more than one million RMB, ensuring the quality of a series of processes from the core components (condenser) of industrial chiller to the welding of sheet metal; in respect of logistics, S&A has set up logistics warehouses in the main cities of China, having greatly reduced the damage due to the long-distance logistics of the goods, and improved transport efficiency; in respect of after-sales service, all the S&A water chillers cover Product Liability Insurance and the warranty period is two years.
 
For more trouble-shooting of industrial water chillers, please click http://www.teyuchiller.com/FAQ.shtml  .
 
CW-3000 water chiller