S&A Industrial chiller expert16 years experience in chiller research, development, manufacture and sale
ROHSCEISOREACH
Email:marketing@teyu.com.cnTel:+86-20-89301885
laser marking machine water chiller
Current location: HomeS&A News Center » Chiller News
How to Process 3D Engraved Wood Craft with MORN MT-L1390 CO2 Laser Engraver?[ 04-12 21:52 ]
Laser machine users often ask whether mini laser engraving machine can process 3D engraving results, or how to use CO2 laser engraving machine to process 3D engraved wood crafts? The former answer of course is YES. And please find answer of the second question from the following parts.
Bystronic fully takes over TTM Laser S.p.A.[ 04-11 21:32 ]
Bystronic is expanding its partnership with the Italian specialist for laser-based tube and profile processing TTM Laser S.p.A. with the outright acquisition of the company. Thus, Bystronic is enhancing its existing range of technologies along the cutting, bending, and automation process chain.
Freeze-proofing Measures for Fiber Laser Cutting Machine in Winter[ 04-10 21:42 ]
The temperature drop seriously with the winter coming . So it’s very necessary to take some measures to keep the fiber laser cutting machine operate normally in the cold winter. Here are some practical measures as below :    The maintenance o...
How to do alignment in fiber laser cutting machine[ 04-09 21:39 ]
EETO laser cutting machine’s debugging include many aspects. Adjustment of optical path is always the first step if there is no part broken. And alignment is very important step in EETO laser cutting machine’s adjustment of optical path.
How to Deal With Your Old YAG Laser Machine?[ 04-08 21:30 ]
YAG laser cutting machine sold very well during 2008 to 2013, but since fiber laser cutting machine being widely used from 2013, we have got many customers who want to replace their old YAG machine.
What opportunities do affordable laser engravers give us?[ 04-07 21:56 ]
First, let's define what is engraving? This drawing of an inscription, a picture, an ornament, manual (so, labor-consuming) or a mechanical (automated) method on the surface of metal, stone, wood, glass, acrylic, plastic, leather. I will tell you about one of the mechanical methods, namely, laser engraving.
Laser Cutting VS Punching[ 08-27 05:06 ]
There are many factors that go into deciding which coil fed technology, laser or punching, will work best for your company. An analysis must be done regarding the type of parts, material, volume and the next process in order to determine the most efficient met...
Fiber Laser vs CO2 laser[ 08-27 04:57 ]
Comparison of a Fiber Laser vs. a CO2 Laser Q:   Why did you choose a fiber laser over the traditional CO2 laser? A:   As of 2006, fiber lasers have dominated the sheet metal cutting industry. A fiber laser is more energy efficient, cu...
The operating conditions of CW-5000 laser chiller[ 05-29 03:53 ]
The operating conditions of CW-5000 laser chiller: 1. Air Temperature: 5℃-35℃ The chiller needs to push heat into the air in order to cool the fluid. 2. Humidity:≤95% and non-condensing Condensation can damage the electronics of the controller.
Air Cooled Chillers Vs Water Cooled Chillers[ 05-29 02:59 ]
Air cooled chillers require less maintenance than water-cooled units. Air cooled chillers do not require a cooling tower or a condenser water pump.
What is an Air-Cooled Chiller?[ 05-27 02:56 ]
air-cooled chiller are refrigeration devices of a sort. They utilize a process of evaporation and condensation with a closed system to chill the surrounding air.
CW-5000 chiller for diode pumped laser system[ 12-12 03:30 ]
CW-5000 is refrigeration type water chiller, suits to cool 80Watt diode pumped laser system.
Water cooler for 150w CO2 Laser Tube of LS2412 Metal Cutter[ 12-09 03:44 ]
S&A water chiller CW-5300 is suitable for cooling 150w CO2 Laser Tube of LS2412 Metal Cutter.
Water cooler for Wooden Die Board Laser Cutting Machine[ 11-21 02:11 ]
S&A water cooler CW-6000 is suitable for cooling 200Watt co2 laser tube of Wooden Die Board Laser Cutting Machine. CW-6000 has 2700w cooling capacity
S&A tell you what is the laboratory cooling system[ 10-14 04:15 ]
S&A is specializing in producing water chillers manufacturer, S&A water chiller can be applied to cool laboratory equipment such as microscope, analytic instrument.
cooling water unit for 3*100w CO2 laser tubes[ 10-09 04:29 ]
CW-6000 cooling water unit is produced by S&A company,suitable for cooling 3*100w CO2 laser tubes, with 3000W cooling capacity, ±0.5℃ precisely temperature control and 2 temperature control models. The water temperature can be adjusted.
300w metal co2 rf laser tube cooling chiller[ 08-01 22:33 ]
CW-6300 water cooling chiller of 8500W cooling capacity is produced by Guangzhou Teyu Electromechanical Co., Ltd. It can be applied to cool 300w metal co2 rf laser tube.
IPG fiber laser water chiller 4200W cooling capacity[ 08-01 22:31 ]
CW-6100AT laser water chiller is produced by Guangzhou Teyu Electromechanical Co., Ltd. It can be applied to cool IPG fiber laser
Total number of records:24 | Pages:212  

Contact S&A

TEL: +86-20-89301885

FAX: +86-20-84309967

SKYPE: teyuchiller

marketing@teyu.com.cn

techsupport@teyu.com.cn

Add: No.50, Zhongchuang Road, Zhongcun town, Panyu District, Guangzhou, China