Wace kalma ce ta farko da ta zo maka a rai idan ka fara ganin siffar 3D a cikin lu'ulu'u? Abin mamaki ne, ko ba haka ba? Duk da cewa wannan ƙirar tana ba ka mamaki, shin ka san yadda aka ƙirƙiri siffar 3D a cikin lu'ulu'u? To, amsar ita ce mai sassaka laser na 3D. Idan aka kwatanta da mai sassaka laser na 2D, sassan da mai sassaka laser na 3D ke sarrafawa sun fi bayyana tunda suna cikin girma 3. Saboda ingancin haske da haske, lu'ulu'u mai siffar 3D a ciki ya zama sananne a matsayin kyauta. Ganin wannan yanayin, Mr. Andreassen daga Denmark ya bar aikinsa ya buɗe shagon kyaututtukansa wanda ke ɗauke da sassaka laser na 3D na lu'ulu'u shekaru 2 da suka gabata.
Shagon Mr. Andreassen ƙarami ne, don haka girman injin ya zama fifiko na biyu ban da ingancin injin. A matsayinsa na babban injin aiki, mai sassaka laser na 3D ya riga ya cinye mafi yawan sararin samaniya kuma kusan ba ya barin sarari ga injin sanyaya. Amma da sa'a, ya same mu kuma ya sami mai sanyaya wanda ya dace da tsarin sassaka laser na 3D - S&A Teyu mai sassaka ruwa mai juyawa CW-5000.
Na'urar sanyaya ruwa mai suna S&A Teyu mai suna CW-5000 an san ta da ƙirarta mai matsewa sosai, tana da girman 58*29*47CM (LXWXH) kawai. Wannan yana adana sarari sosai kuma ya dace da masu amfani waɗanda ke da ƙarancin sararin aiki. Hakanan ana iya haɗa shi cikin na'urar sassaka laser dangane da tsarin injin. Amma ƙaramin girma ba lallai bane yana nufin ƙarancin ingancin sanyaya ba. Tsarin sanyaya laser mai ƙaramin CW-5000 yana da ƙarfin sanyaya 800W tare da kwanciyar hankali na zafin jiki na ±0.3℃, wanda ke nuna daidaitaccen kuma daidaitaccen sarrafa zafin jiki ga na'urar sassaka laser ta 3D.
Don ƙarin bayani game da na'urar sanyaya ruwa ta S&A Teyu mai sassaka CW-5000, danna https://www.chillermanual.net/water-chillers-cw-5000-cooling-capacity-800w_p7.html
