Laser ɗin Ultraviolet da aka yi amfani da shi don yanke Laser na PVC

PVC abu ne da aka saba amfani da shi a rayuwar yau da kullun , wanda ya dace da allunan gyaran gida, ƙofofi da tagogi, kayan wasa, kayan rubutu, jakunkuna da akwatuna, da sauransu. Babban abin da ke cikin PVC shine polyvinyl chloride, wani nau'in filastik mai fa'idodi na musamman. A nan, injin sanyaya iska na S&A yana son amfani da wannan damar don gaya muku:

Kayan PVC suna da matuƙar ƙarfin aiki. Yana da laushi, yana jure sanyi, yana jure karce, yana jure acid da alkali, yana jure tsatsa, yana jure tsagewa, yana jure wa tsagewa, kuma yana da kyau wajen waldawa, kuma aikinsa na zahiri ya fi roba da sauran kayan da aka naɗe.

Kayan PVC ba su da guba , ba sa haifar da wata illa ko ɓacin rai ga mutane, kuma mutanen da ke da rashin lafiyar itace da fenti za su iya amfani da su. Duk kayan daki ko kayan kicin da aka shirya a cikin fim ɗin PVC sun dace sosai. A matsayin fim ɗin ado, fim ɗin PVC na iya rage amfani da itace, musamman don kare muhalli. Duk da haka, galibi ana ƙara masu daidaita yanayi, man shafawa, kayan aiki na taimako, launuka, abubuwan da ke haifar da tasiri da sauran ƙarin abubuwa a cikin sarrafa kayan PVC. Kuma idan babu cikakken monomer ko samfurin lalata, zai ƙunshi wasu guba.

Damar dumama kayan PVC yana haifar da wahalar sarrafawa

Kayan PVC yana da fa'idodi daban-daban, amma ƙarfin zafi a jikinsa ya taɓa sanya PVC abin mamaki a aikin sarrafawa. Na dogon lokaci, ana yanke kayan PVC da ruwan wukake daban-daban, amma yana da wuya ga masu yanke su sarrafa siffofi marasa tsari ko na musamman yadda ya kamata. Yanke Laser yana da wahala. Da zarar ba a sarrafa zafin yankewa yadda ya kamata ba, burrs za su bayyana a gefuna.

Laser mai haske tare da ingantaccen sarrafa zafin jiki yana ɗaukar yanke PVC zuwa sabuwar hanya

Wasu kamfanonin laser suna amfani da laser mai ƙarfin UV mai ƙarfin 20W don yanke kayan PVC. A matsayin haske mai sanyi, laser mai ƙarfin ultraviolet zai iya magance matsalar aikin zafi na PVC. Injin yanke laser na UV yana da daidaitaccen sarrafa zafin yankewa da ƙaramin saman da zafi ya shafa. Don haka kayan PVC da injin yanke laser na UV ya yanke suna da gefuna masu santsi, sarrafawa mai inganci da kuma kyakkyawan sarrafa inganci. Laser mai ƙarfin UV yana ba da mafita mafi kyau don yanke PVC.

A wannan ma'anar, sarrafa zafin jiki mai inganci shine mabuɗin sarrafa kayan PVC. Laser na UV, tushen hasken sanyi, yana da matukar tasiri ga zafin jiki. Idan ba a sarrafa zafin yadda ya kamata ba, zai shafi fitowar haske da kwanciyar hankali na laser na UV. Don haka a Injin sanyaya laser UV ana buƙatar don tabbatar da aikin laser na UV yadda ya kamata. na'urar sanyaya ruwa ta UV Laser Daidaiton zafin jiki na ±0.1℃ zai iya biyan buƙatar laser UV don sarrafa zafin jiki mai matuƙar daidaito. Yanayin ruwansa ba ya shafar yanayin zafinsa kuma yanayin zafinsa yana kiyaye shi da kansa, wanda ke samar da ingantaccen maganin sanyaya ga na'urorin laser na ultraviolet.