CWUP-10 na injin daskarewa na masana'antu mai ɗaukuwa don Laser UV Laser mai sauri ±0.1°C Daidaito
TEYU injin sanyaya masana'antu mai ɗaukuwa An tsara CWUP-10 don tsarin laser mai sauri da UV waɗanda ke buƙatar daidaitaccen sarrafa zafin jiki. Yana ba da kwanciyar hankali na zafin jiki na ±0.1°C ta hanyar fasahar sarrafa PID. Tsarin da'irar sanyaya da bututun da aka inganta yana taimakawa rage samar da kumfa da rage yuwuwar tasirin aikin laser. Duk da ƙaramin sawun ...
TEYU Injin CWUP-10 yana da hanyar sadarwa ta Modbus ta RS485, wanda ke ba da damar musayar bayanai mai sauƙi tsakanin injin sanyaya da tsarin laser. Mai nuna matakin ruwa mai sauƙin karantawa, mai sarrafa zafin jiki na dijital da lambobin ƙararrawa guda 12 da aka gina a ciki suna sauƙaƙa aiki da sa ido. CWUP-10 mai sauƙi, mai ƙanƙanta kuma mai sauƙin kulawa, yana ba da mafita mai amfani ga tsarin laser mai ƙarfi da sauri na UV.
Samfuri: TEYU CWUP-10
Ƙarfin sanyaya: 650W @ 20℃
Daidaito: ±0.1℃
Garanti: Shekaru 2
Ma'aunin Duniya: CE, REACH, RoHS
Babban Aikace-aikace
TEYU Injin sanyaya CWUP-10 yana ba da sanyaya mai kyau da kwanciyar hankali ga tsarin laser na UV da na zamani, da kuma sauran kayan aikin da ake amfani da su wajen buƙatar aikace-aikacen sarrafa kayan aiki masu inganci.
Siffofin Chiller
Tare da daidaiton zafin jiki na ±0.1°C da kuma sadarwa ta Modbus ta RS-485, TEYU CWUP-10 yana ba da sanyaya mai inganci da aminci ga tsarin laser mai sauri da UV, da kuma sauran kayan aikin daidaito waɗanda ke buƙatar sarrafa zafin jiki mai ƙarfi.
±0.1°C Yanayin Zafi
✅️ Kula da zafin jiki na PID
✅️ Yanayin aiki mai dorewa
✅️Rage canjin yanayin zafi
✅️Aikin ƙaramar hayaniya
Kariyar Hankali
✅️ Gano ƙarancin matakin ruwa
✅️Gano ƙarancin kwarara
✅️Ƙararrawar zafin ruwa mai girma/ƙara
✅️Lambobin ƙararrawa 12
Sadarwa ta RS485
✅️RS485 Modbus RTU
✅️Sadarwar tsarin Laser
✅️Kulawa a ainihin lokaci
✅️Haɗin tsarin mai dacewa
Sauƙin Gyara
✅️Lambobin ƙararrawa don sauƙin ganewar asali
✅️Mai nuna matakin ruwa na gani
✅️Mai sarrafa dijital mai sauƙin amfani
✅️Matatar mai sauƙin shiga mai hana ƙura
Samfuri Sigogi
| Abu | Bayani | CWUP-10TNTY |
| Daidaiton yanayin zafi | Kula da PID | ±0.1℃ |
| Ƙarfin sanyaya | @ 20°C Ruwa / 20°C Yanayi | 650W |
| @ 20°C Ruwa / 30°C Yanayi | 580W | |
| Firji | R-134a/R-32/R-1234yf/R-513A | |
| Bayanan lantarki | Wutar lantarki | AC 1P 220~240V |
| Mita | 50Hz/60Hz | |
| Na yanzu | 0.9~5.5A | |
| Amfani da wutar lantarki ta injin | 1.03/1.06kW | |
| Ƙarfin matsewa | 0.34/0.37kW | |
| 0.46/0.5HP | ||
| Sadarwa | Yarjejeniyar RS485 ModBus RTU | |
| Mai hita | 500W | |
| Da'irar ruwa | Ƙarfin famfo | 0.13kW |
| Gudun da aka ƙima | 10L/min | |
| Matsakaicin matsin lamba na famfo | mashaya 4 | |
| Ƙarfin tanki | 6L | |
| Na'urar firikwensin kwarara | Ana iya karanta ƙimar kwararar ruwa | |
| Ƙararrawa ta asali mai ƙarancin zafin jiki | Ƙararrawa mai zafi mai zafi 5℃ ƙasa, 45℃ | |
| Matatar ruwa | Matatar laka ta waje mai amfani da micron 5 zaɓaɓɓu ce | |
| Alamar matakin ruwa | An saka nunin matakin ruwa a waje | |
| Shigarwa da fita | Rp1/2" | |
| Kewayon aikace-aikace - zafin jiki | Wurin fitar da ruwa mai sanyaya | 10-35℃ |
| Zafin yanayi da danshi | 15-40℃ | |
| Sufuri da ajiya | 0-70℃ | |
| Hayaniya (dB(A)) | <55 | |
| Girma | Samfuri | 58 × 29 × 52cm (L × W × H) |
| shiryawa | 65 × 36 × 56cm (L × W × H) | |
| Nauyi | Cikakken nauyi | 21kg |
| Cikakken nauyi | 23kg | |
Wutar lantarkin aiki na iya bambanta a ƙarƙashin yanayi daban-daban na aiki. Bayanan da ke sama don amfani ne kawai. Da fatan za a yi la'akari da ainihin samfurin da aka kawo.
Abubuwa na Zaɓuɓɓuka
Mai hita
Matata
Filogi na yau da kullun na Amurka
Filogi na yau da kullun na EN
Mai sanyaya cikakkun bayanai
Mai Kula da Zafin Zafi na Dijital
Daidaitaccen Kulawa: Kula da sanyaya mai ɗorewa tare da sarrafa zafin jiki na ±0.1°C.
Mai nuna matakin ruwa mai sauƙin karantawa
Duba a hankali: Gano matakan ruwa cikin sauri ta hanyar amfani da alamun rawaya, kore da ja masu haske.
Tashar Sadarwa ta Modbus RS485
Haɗin kai mara matsala: Bada damar sadarwa mai dacewa tsakanin na'urar sanyaya da tsarin laser.
Ka'idar Aiki ta Chiller
Nisa ta hanyar iska
Takardar Shaidar
Me Yasa Zabi TEYU Mai Kera Chiller?
An kafa TEYU a shekarar 2002, ƙwararren mai kera injinan sanyaya sanyi ne na masana'antu tare da shekaru 24 na gwaninta a fannin fasahar sanyaya, yana hidimar aikace-aikacen masana'antu da laser a duk duniya.
FAQ
T1: Shin TEYU masana'antar sanyaya sanyi ne ko kuma kamfanin ciniki?
A1: TEYU ƙwararren mai kera injinan sanyaya sanyi ne na masana'antu wanda ke da ƙwarewa sama da shekaru 24, wanda aka kafa a shekara ta 2002.
T2: Wane ruwa ya kamata in yi amfani da shi a cikin injin sanyaya kayan masana'antu?
A2: Ana ba da shawarar ruwa mai tsafta, mai narkewa ko kuma mai narkewa don tsarin sanyaya mai yawo.
T3: Zan iya amfani da ruwan famfo a cikin injin sanyaya masana'antu?
A3: Ba a ba da shawarar ruwan famfo gabaɗaya ba saboda yana iya ƙunsar datti wanda zai iya haifar da taruwa ko kuma ya shafi tsarin sanyaya. Ana ba da shawarar ruwan da aka tsarkake, aka tace ko aka cire daga jiki.
Q4: Sau nawa ya kamata in canza ruwan sanyi?
A4: Ana ba da shawarar a maye gurbin ruwa duk bayan watanni 3. A cikin yanayin aiki mai ƙura ko mai wahala, ana iya buƙatar maye gurbin akai-akai.
Q5: Menene zafin jiki na yanayi da aka ba da shawarar ga na'urar sanyaya?
A5: Ya kamata na'urar sanyaya ta yi aiki a cikin yanayi mai kyau tare da yanayin zafi ƙasa da 45°C.
Q6: Ta yaya zan iya hana sanyin sanyi?
A6: A cikin yanayi mai sanyi, zaɓi na hita mai hana daskarewa ko kuma maganin hana daskarewa mai dacewa zai iya taimakawa hana daskarewa. Da fatan za a tuntuɓi tallafin TEYU don samun mafita da umarnin amfani da ya dace.
Muna nan a gare ku lokacin da kuke buƙatar mu.
Da fatan za a cike fom ɗin don tuntuɓe mu, kuma za mu yi farin cikin taimaka muku.