Igwe eji egbutu ihe ọkụ 6kW Fiber Laser na TEYU CWFL-6000 Ngwọta jụrụ oyi

Kedu ihe bụ 6kW Fiber Laser Cutting Machine?

A 6kW eriri laser ọnwụ igwe bụ a elu-ike ulo oru usoro e mere maka nkenke ọnwụ nke dị iche iche metal ihe. "6kW" na-egosi ikike mmepụta laser nke 6000 watts, nke na-akwalite ikike nhazi nke ọma, karịsịa mgbe a na-eji ọla ma ọ bụ na-atụgharị uche. Ụdị igwe a na-eji eriri laser fiber na-ebuga ike laser site na eriri eriri eriri na-agbanwe agbanwe na isi ịkpụ, ebe ọkụ na-elekwasị anya iji gbazee ma ọ bụ vaporize ihe. Gas na-enyere aka (dị ka oxygen ma ọ bụ nitrogen) na-enyere aka ịfụpụ ihe a wụrụ awụ ka ọ bụrụ nke dị ọcha na nke ziri ezi.

Tụnyere sistemụ laser CO₂, laser fiber na-enye:

* Ntughari fotoelectric dị elu (ihe ruru 45%),

* Usoro kọmpat na-enweghị enyo na-egosipụta,

* Ogo ọkụ kwụsiri ike,

* Ọnụ ego arụ ọrụ na mmezi dị ala.

A 6kW eriri laser usoro na-enye ahụkebe arụmọrụ mgbe ịcha:

Ihe ruru 25-30 mm carbon steel (ya na oxygen),

Ihe ruru 15-20 mm igwe anaghị agba nchara (ya na nitrogen),

12-15mm aluminum alloy,

  Dabere n'ịdị mma ihe, ịdị ọcha gas, na nhazi usoro.

The 6kW eriri laser cutter nke ọma na nhazi:

* Ihe mkpuchi metal mpempe akwụkwọ,

* ogwe elevator,

* Akụkụ ụgbọ ala,

* Igwe ọrụ ugbo,

* Ngwa ụlọ,

* Ihe mkpuchi batrị na akụrụngwa ike,

* Ngwa kichin igwe anaghị agba nchara,

  na ọtụtụ ndị ọzọ.

Isi uru gụnyere:

* Mbelata ọsọ ọsọ na ihe ndị dị oke ibu,

* Ngosipụta dị mma na obere dross,

* Nhazi nkọwa zuru oke ekele maka nlebara anya beam dị elu,

* Mgbanwe ihe dị ukwuu maka ọla ferrous na nke na-abụghị igwe,

* Oriri ike na obere oge, na-eme ka ọ dị mma maka mmepụta oke.

Ntak Igwe ọkụ ụlọ ọrụ Dị mkpa maka 6kW Fiber Laser Systems

Nrụpụta ike dị elu nke laser 6 kW na-ebute oke ọkụ, na-adịkarị karịa 9-10 kW nke ibu ọkụ. Nlekọta okpomọkụ kwesịrị ekwesị dị oke mkpa maka:

* Jikwaa nkwụsi ike mmepụta laser,

* Chebe modul diode na fiber optics,

* Chekwaa ogo beam na ịcha izizi,

* Gbochie ikpo oke ọkụ, condensation, ma ọ bụ mmebi;

* Gbatịkwuo ogologo ndụ nke sistemu laser.

Nke a bụ ebe TEYU CWFL-6000 dual-circuit ulo oru chiller  na-arụ ọrụ dị mkpa.

               

TEYU Fiber Laser Chiller CWFL-6000

               

TEYU Fiber Laser Chiller CWFL-6000

               

TEYU Fiber Laser Chiller CWFL-6000

TEYU CWFL-6000 Chiller – Raara onwe ya nye jụrụ oyi maka 6kW Fiber Lasers

Fiber Laser Chiller CWFL-6000 bụ chiller ụlọ ọrụ nwere okpomọkụ pụrụ iche nke TEYU S mepụtara.&A iji kwado sistemụ laser fiber 6000W. Ọ na-enye nju oyi dị elu nke ahaziri maka isi iyi laser na laser optics.

Nkọwapụta igodo:

* Ezubere maka laser fiber 6 kW, nwere ikike jụrụ oyi zuru oke

* Nkwụsi ike okpomọkụ: ± 1 ° C

* Sekit abụọ jụrụ oyi maka laser na optics

* Oke njikwa okpomọkụ: 5°C – 35°C

* Igwe nju oyi: R-410A, enyi na enyi

* Ike tank mmiri: 70L

* Oke eruba: 2L / min + 50L / min

* Max. mgbapụta mgbali: 5.9 mmanya ~ 6.15 mmanya

* Nkwukọrịta: RS-485 MODBUS maka njikọta na sistemụ laser

* Ọrụ mkpu: oke okpomọkụ, ọdịda ọnụego, njehie sensọ, wdg.

* Ike ọkọnọ: AC 380V, 3-phase

Atụmatụ ama ama:

* Mpaghara njikwa okpomọkụ nwere onwe nke abụọ na-ebuli arụmọrụ maka mpaghara abụọ dị oke egwu (laser na optics).

* Mgbasa mmiri mechiri emechi yana ndakọrịta mmiri nke deionized na-echebe laser eriri site na corrosion, scaling, na mmetọ.

* Mgbochi oyi na mgbochi condensation imewe, ọkachasị dị mkpa na gburugburu oyi ma ọ bụ iru mmiri.

* Nhazi ụlọ ọrụ kọmpat na nke siri ike, nwere wiil na aka na-adịgide adịgide maka ịdị mfe nke ngagharị na ntinye.

TEYU - Ndị mmekọ Global Fiber Laser Integrators tụkwasịrị obi

N'ihe karịrị afọ 23 nke ahụmịhe na njikwa ọkụ yana ihe karịrị nkeji 200,000 na olu ahịa na 2024, TEYU S&A ghọtara A dị ka onye ndu zuru ụwa ọnụ n'ichepụta chiller ụlọ ọrụ. Usoro CWFL, ọkachasị ndị CWFL-6000 fiber laser chiller , a nakweere n'ọtụtụ ebe site na-eduga Laser akụrụngwa emepụta na OEMs dị ka aga-na jụrụ ngwọta maka elu-ike eriri laser usoro.