Ịghọta igwe igwe ịgbado ọkụ laser YAG na nhazi chiller ha

Kedu igwe igwe ịgbado ọkụ YAG Laser si arụ ọrụ

Igwe ịgbado ọkụ nke YAG laser na-emepụta 1064nm wavelength laser doo site na eletriki eletriki ma ọ bụ oriọna na-agbapụta YAG iji kpalie ion chromium. Ihe na-akpata laser na-elekwasị anya na workpiece elu site na ngwa anya usoro, agbaze ihe na-etolite a wụrụ awụ ọdọ mmiri. Ozugbo ọ dị jụụ, ihe ahụ na-eme ka ọ bụrụ ihe nkedo weld, na-emecha usoro ịgbado ọkụ.

Ụdị na ngwa nke YAG Laser Welding Machines

A na-ekewa ndị welders laser YAG site na isi iyi laser, ọnọdụ pulse, na ngwa:

1) Site na ụdị Laser: Igwe ọkụ YAG na-agbapụta ọkụ na-enye ọnụ ala dị ala ma dabara maka ngwa ịgbado ọkụ n'ozuzu. Igwe lasers YAG na-agbapụta diode* na-enye arụmọrụ dị elu yana ogologo ndụ ọrụ, dị mma maka ịgbado ọkụ nkenke.

2) Site Pulse Mode: Q-switched pulsed YAG lasers na-ebuga oke nkenke, dabara maka micro-welds na ihe pụrụ iche. Ọkọlọtọ pulsed YAG lasers na-enye mgbanwe sara mbara yana ịdị oke ọnụ ahịa.

3) Site na mpaghara ngwa:

* Imepụta ụgbọ ala: ịgbado ọkụ nke okpokolo agba na akụrụngwa injin.

* Nrụpụta elektrọnik: ịgbado ọkụ nke ụzọ mgbawa na akara sekit.

* Industrylọ ọrụ akụrụngwa: ijikọ ihe nrụnye igwe maka ọnụ ụzọ, windo na arịa ụlọ.

* Industrylọ ọrụ ịchọ mma: ịgbado ọkụ nke ọma nke ọla dị oke ọnụ ahịa na nkume bara nnukwu uru.

Mkpa nhazi Chiller maka YAG Laser welders

Igwe ịgbado ọkụ laser YAG na-emepụta oke okpomọkụ n'oge arụ ọrụ. Na-enweghị nkwụsị ọkụ dị irè, okpomọkụ laser nwere ike ibili, na-eduga n'ịkwụsị ike, belata àgwà ịgbado ọkụ, ma ọ bụ ọbụna mmebi akụrụngwa. Ya mere, mmiri na-ekpo ọkụ nke a pụrụ ịdabere na ya dị mkpa maka ịnọgide na-arụ ọrụ kachasị mma yana ịhụ na ịrụ ọrụ ịgbado ọkụ na-agbanwe agbanwe.

TEYU Laser Chillers maka YAG Laser Welder

TEYU Laser Chillers maka YAG Laser Welder

TEYU Laser Chillers maka YAG Laser Welder

Ihe ndị dị mkpa na Ịhọrọ Laser Chiller

Iji hụ na arụmọrụ kacha mma na ntụkwasị obi, tụlee ihe ndị a mgbe ị na-ahọrọ chiller laser maka YAG laser welder s:

1) Ike jụrụ oyi: Dakọtara ike jụrụ oyi nke chiller na mmepụta laser iji wepụ okpomọkụ nke ọma na ngwa ngwa.

2) Okpomọkụ njikwa nkenke: Oke-nkenke, sistemụ njikwa ọgụgụ isi na-enyere aka ịnọgide na-enwe okpomọkụ kwụsiri ike, na-ebelata ntụpọ ịgbado ọkụ nke mgbanwe ọkụ na-akpata.

3) Nchekwa na Njirimara Mkpu: Nchekwa agbakwunyere, dị ka mgbaba, oke okpomọkụ, na mkpu mkpuchi na-agafe agafe, chebe akụrụngwa ahụ.

4) Nrụmọrụ ike na nnabata gburugburu ebe obibi: Họrọ chillers na-echekwa ike nke na-eji refrigerants enyi na enyi iji belata ụgwọ ọrụ yana ịkwado ebumnuche nkwado.

Kedu ihe kpatara ịhọrọ TEYU Chillers maka igwe ịgbado ọkụ laser YAG

A na-emezi chillers ụlọ ọrụ TEYU iji gboo mkpa jụrụ oyi nke sistemụ ịgbado ọkụ laser YAG. Ha na-enye:

1) Arụmọrụ jụrụ oyi nke ọma: Mwepụ ọkụ ngwa ngwa ma kwụsie ike iji gbochie ibu ibu.

2) Njikwa okpomọkụ nke ọma: Na-eme ka arụmọrụ laser kachasị mma n'oge usoro ịgbado ọkụ.

3) Atụmatụ nchekwa zuru oke: Ọtụtụ ọrụ mkpu maka ọrụ na-enweghị mmejọ.

4) Eco-Friendly Design: Oriri ike dị ala na refrigerant na-akwado ụkpụrụ akwụkwọ ndụ akwụkwọ ndụ.