Laser ea 355nm UV e fihlella joang ho tšoaea ho nepahetseng ka laser?

Laser ea UV e na le leqhubu la bolelele ba 355nm 'me e na le bophara bo bokhutšoane ba pulse, lebone la laser ea boleng bo holimo, ho nepahala ho phahameng le matla a phahameng a tlhoro.

Laser ea UV e na le leqhubu la bolelele ba 355nm 'me e na le bophara bo bokhutšoane ba pulse, beam ea boleng bo holimo ea laser, ho nepahala ho phahameng le matla a phahameng a tlhoro. Likarolo tsena tse hlahelletseng li etsa laser ea UV e be mohloli o nepahetseng oa laser ho tšoaeang laser. Laser ea UV ha e na ts'ebeliso e pharaletseng e ts'oanang ea ts'ebetso ea thepa joalo ka laser ea infrared (wavelength ke 1.06μm), empa e ntle haholo ha e sebetsana le lipolasetiki le li-polymers tse khethehileng tse sebelisoang e le lisebelisoa tsa motheo ho PCB mme mefuta ena ea thepa ha e khonehe. e ka sebetsoa ka laser ea infrared kapa kalafo ea mocheso.

Ka hona, ha ho bapisoa le laser ea infrared, laser ea UV e na le matla a manyane a mocheso le lisebelisoa tsa nano-level le micro-level e phahameng tse sebetsanang hantle le mocheso, laser ea UV e na le melemo e totobetseng.

Ho tšoaea ka laser ho sebelisa lebone la laser le nang le matla a phahameng ho projeke holim'a ntho e le hore bokaholimo ba ntho bo fetohe mouoane kapa bo fetole 'mala, ho siea letšoao le sa feleng. Kaha laser ea UV e na le likarolo tse boletsoeng ka holimo, hangata e sebelisoa e le mohloli oa laser oa mochine oa ho tšoaea laser. Khiboto ea komporo e atileng haholo bophelong ba rona ba letsatsi le letsatsi, e sebetsoa ke mochini o tšoaeang laser oa UV. Nakong e fetileng, keyboard ea k'homphieutha e sebelisa khatiso ea inkjet ho hlahisa litlhaku, empa ha nako e ntse e feta, litlhaku li qala ho nyamela, e leng ntho e se nang botsoalle ho basebelisi. Empa ka mochini o tšoaeang laser oa UV, litlhaku tse keyboard li tla lula li ts'oana ho sa tsotelehe. Ha e le hantle, matšoao (litlhaku, matšoao, mekhoa, joalo-joalo) a hlahisoang ke mochine oa laser oa UV oa ho tšoaea e ka ba nano-level kapa micro-level, e nepahetseng haholo le e thusang haholo khahlanong le ho qhekella.

Joalo ka mefuta e meng ea lisebelisoa tse nepahetseng, laser ea UV le eona e hloka ho phopholetsoa ka nepo ho boloka ho nepahala ha eona. 'Me u hloka mokhoa o sebetsang oa ho futhumatsa metsi. S&A Teyu CWUP letoto la li-chiller tse nkehang habobebe e ka ba likhetho tsa hau tse nepahetseng. Letoto lena la tsamaiso ea metsi a chiller e na le botsitso bo phahameng ba mocheso oa ± 0.1 ℃ le Modbus-485 e khonang e le hore puisano pakeng tsa laser ea UV le chiller e ka phethahala. Mofuta ona oa botsitso ba mocheso o phahameng o tiisa hore laser ea UV e lula e le tlas'a mocheso o tsitsitseng. Hape, li-unit tsa chiller tse nkehang tsa CWUP li na le mabili a caster, kahoo u ka li beha kae kapa kae moo u batlang. Bakeng sa tlhaiso-leseling e batsi mabapi le litsamaiso tsa chiller tsa metsi tsa CWUP, tlanyahttps://www.teyuchiller.com/ultrafast-laser-uv-laser-chiller_c3

portable chiller unit

Tlhahisoleseling ea mantlha

Selemo se thehiloe

--
Mofuta oa Khoebo

--
Naha / Setereke

--
Indasteri ea mantlha

--
Lihlahisoa tsa mantlha

--
Khoebo ea molao ea molao

--
Basebetsi ka kakaretso

--
Boleng ba ho hlahisa selemo le selemo

--
Mmaraka oa kantle ho naha

--
Bareki ba Kopaneng

--

KELETSO Boemo ba hajoale ba ho roala laser boenjiniere ba metsing

Mokhoa oa laser o thusa ho etsa hore indasteri ea liaparo e be botsoalle haholoanyane tikolohong E 'NGOE

Sebaka sa marang-rang

.

TEYU S&A Chiller e thehiloe ka 2002 ka boiphihlelo ba lilemo tse 22 tsa tlhahiso ea chiller, 'me hona joale e amoheloa e le pula-maliboho ea pholiso ea theknoloji le molekane ea tšepahalang indastering ea laser.
LIEKETSENG POTLAKO
Lihlahisoa
Tshebeletso
Nyeoe
Litaba
Mabapi le rona
- Iteanye le rona
ITEANYE LE RONA

Lengolo-tsoibila: [email protected]
Mohala: +86-20-89301885
Fax: +86-20-84309967
Skype: teyutech

Puo Sebaka sa marang-rang

Laser ea 355nm UV e fihlella joang ho tšoaea ho nepahetseng ka laser?

Romella kopo ea hau