Precise Temperature Control for Laser Systems and Industrial Applications Since 2002
Language
To guarantee the fiber laser cutter and fiber laser cleaner work normally in the long run,you need a S&A Teyu CWFL series dual channel recirculating water chiller.
As we know, fiber laser cutter is a versatile helper in cutting metal plate and has wide applications. But metal plates aren’t always that perfect and sometimes become rusty. So how what should be kept in mind when using fiber laser cutter to laser cut rusty metal plate?
1.When laser cutting or drilling on the rusty metal plate, it is likely that the hole will become broken, which will cause contamination to the optics. That requires users to pre-process the rusty metal plate first. However, the cutting quality is less satisfying than when it is cutting normal metal plate;
Well, laser cleaning machine can. Laser cleaning machine is more eco-friendly and efficient than traditional rust removing method. Therefore, the most ideal way to do with a rusty metal plate is to laser clean it first and then perform laser cutting.
Both metal plate laser cutting and laser cleaning require fiber laser as the laser source, for it has the highest photoelectric conversion rate. To guarantee the fiber laser cutter and fiber laser cleaner work normally in the long run, you need a S&A Teyu CWFL series dual channel recirculating water chiller. For more information about this chiller, click https://www.teyuchiller.com/fiber-laser-chillers_c2
TEYU S&A Chiller was founded in 2002 with 22 years of chiller manufacturing experience, and now is recognized as a cooling technology pioneer and reliable partner in laser industry.
Copyright © 2021 TEYU S&A Chiller - All Rights Reserved.
