Ngwa ndị ejiri aka welder laser na-adabara maka nhazi

]

A na-eji eriri eriri eriri 1-2KW na-akwadokarị welder laser. Iji dobe welder laser ejiri aka dị mma, isi iyi laser fiber dị n'ime kwesịrị ka ajụkwa oyi nke ọma. N'oge a, usoro mkpuchi mmiri ga-adị mma.

]

Na-egosipụta ọsọ ịgbado ọkụ dị elu, nkenke dị elu& arụmọrụ na-eji ire ụtọ weld ahịrị, handheld laser welder aghọwo a "na-ekpo ọkụ" Usoro na ulo oru ịgbado ọkụ ngalaba. Enwere ngwa dị iche iche maka welder laser ejiri aka, mana ọtụtụ ndị amaghị ihe ọ ga-adabara iji hazie. Taa, anyị ga-achọ ịdepụta ụfọdụ n'ime ihe ndị a na-ahụkarị n'okpuru.

1.Die ígwè
Ihe eji agbado ọkụ laser ejiri aka na-adabara maka nchara anwụ anwụ nke ụdị dị iche iche ma nwee ọmarịcha ịgbado ọkụ.

2.Carbon ígwè
Iji eriri laser ejiri aka wee weld carbon steel nwere ike nweta mmetụta ịgbado ọkụ dị mma yana ịdị mma ịgbado ọkụ dabere na ọdịnaya adịghị ọcha. Iji nweta àgwà ịgbado ọkụ kacha mma, ọ dị mkpa ka a rụọ ọkụ ọkụ ma ọ bụrụ na nchara carbon nwere ihe karịrị 25% nke carbon ka micro-crack ghara ime.

3. Igwe anaghị agba nchara
N'ihi ọsọ ịgbado ọkụ dị elu yana obere okpomọkụ na-emetụta mpaghara, welder laser ejiri aka nwere ike ibelata mmetụta ọjọọ nke nnukwu ọnụọgụ nke mgbasawanye linear na igwe anaghị agba nchara wetara. Ọzọkwa, eriri weld enweghị afụ, adịghị ọcha na ihe ndị ọzọ. N'iji ya tụnyere carbon steel, igwe anaghị agba nchara nwere ike nweta ahịrị weld dị warara nke ịgbado ọkụ miri emi, n'ihi na ọ nwere ọnụọgụ conductivity dị ala, ọnụego nnabata ike dị elu na arụmọrụ agbaze. Ya mere, ọ dị ezigbo mma iji welder laser ejiri aka wee were igwe anaghị agba nchara.

4.Ọla kọpa na ọla kọpa alloy
Ịgba ọla kọpa na alloy ọla kọpa nwere ike ịnwe nsogbu enweghị njikọ na ọ bụghị ịgbado ọkụ. Ya mere, ọ ka mma iji handheld laser welder na-elekwasị anya ike na elu ike laser isi iyi na-eme preheating.

N'ezie, na mgbakwunye na ọla ndị ahụ a kpọtụrụ aha, welder laser ejiri aka nwekwara ike jikọta ụdị ọla dị iche iche ọnụ. N'okpuru ọnọdụ ụfọdụ, ọla kọpa& nickle, nkpu& titanium, ọla kọpa& titanium, titanium& molybdenum, ọla& Enwere ike ijikọ ọla kọpa n'otu n'otu na welder laser ejiri aka.

A na-eji eriri eriri eriri 1-2KW na-akwadokarị welder laser. Iji dobe welder laser ejiri aka dị mma, isi iyi laser fiber dị n'ime kwesịrị ka ajụkwa oyi nke ọma. N'oge a, usoro mmiri oyi ga-adị mma.

S&A Teyu RMFL usoro rack mount chiller bụ nke emebere ya maka ịme ka welder laser ejiri aka mee ka ọ dị jụụ site na 1-2KW. Ngwunye ihe mkpuchi nke chiller na-enye ohere ka etinye ya n'ime nkwagharị na-ebugharị, nke na-eme ka ọ dịkwuo elu. Na mgbakwunye, usoro RMFL usoro mmiri mmiri mmiri nwere ọdụ ụgbọ mmiri juru n'ihu yana nlele ọkwa mmiri, yabụ ọ dị mfe maka ndị ọrụ ime ndochi mmiri na ịlele. Nke kachasị mkpa, njiri elu igwe chiller ± 0.5 ℃, nke ziri ezi. Maka ozi ndị ọzọ gbasara usoro mmiri chiller RMFL, pịa https://www.teyuchiller.com/fiber-laser-chillers_c2

rack mount chiller

Ozi bụ isi

Afọ guzobere

--
Ụdị azụmahịa

--
Obodo / mpaghara

--
Ụlọ ọrụ bụ isi

--
Isi Ngwa

--
Enterprise Iwu onye

--
Ndị ọrụ niile

--
Akwukwo mmeputa kwa afọ

--
Ahịa mbufe

--
Ndị ahịa na-emekọ ihe ọnụ

--

Buru Mmiri distilled ọ bụ naanị mmiri jụrụ oyi maka CW-6000 recirculating chiller?

Ndị ahịa Italy Co2 laser zụtara CW-3000 chiller mmiri ọzọ OSOTE

map saịtị

]

TEYU S&A Chiller tọrọ ntọala na 2002 na afọ 22 nke ahụmịhe nrụpụta chiller, ma ugbu a a ghọtara ya dị ka onye ọsụ ụzọ teknụzụ jụrụ oyi na onye mmekọ a pụrụ ịdabere na ya na ụlọ ọrụ laser.
]
Njikọ ngwa ngwa
]
                Ngwaahịa
                Ọrụ
                Ikpe
                Akụkọ
                Gbasara anyị
- Kpọtụrụ anyị
]
KPỌTỤRỤ ANYỊ

]
Email: [email protected]
Tel: +86-20-89301885
Fax: + 86-20-84309967
Skype: teyutech

Asụsụ map saịtị

]

Ngwa ndị ejiri aka welder laser na-adabara maka nhazi

Ziga ajụjụ gị