Laser News
Precise Temperature Control for Laser Systems and Industrial Applications Since 2002
Language
Water cooling covers the entire power range that CO₂ lasers can achieve. In the actual production process, the water temperature adjustment function of the chiller is usually used to keep the laser equipment within a suitable temperature range to ensure the continuous and stable operation of the laser equipment.
There are two heat dissipation methods commonly used in CO2 lasers, air cooling and water cooling. Air-cooled heat dissipation is mainly used for low-power lasers, and its power generally does not exceed 100W. Water cooling covers the entire power range that CO₂ lasers can achieve.
Water cooling usually uses pure water, distilled water or deionized water as cooling water to dissipate heat from the laser. The main factor affecting heat dissipation is temperature difference. The increase in the temperature of the cooling water will reduce the temperature difference and the heat dissipation effect, thereby affecting the laser power. Therefore, reducing the cooling water temperature can improve the heat dissipation and increase the laser power to a certain extent. However, the cooling water cannot be reduced indefinitely. Too low temperature requires a longer warm-up time, and may also cause condensation on the surface of the laser, which affects the use of the laser and even shortens its service life.
In the actual production process, the water temperature adjustment function of the chiller is usually used to keep the laser equipment within a suitable temperature range to ensure the continuous and stable operation of the laser equipment. The CW series chillers developed by S&A for CO2 lasers have two modes of constant temperature and intelligent temperature control. The temperature control accuracy can be accurate to ±0.3℃, which can meet the cooling and cooling requirements of most CO2 lasers, and ensure that the CO2 laser equipment continues, stable and efficient operation.
S&A chiller was established in 2002 and has more than 20 years of experience in chiller manufacturing. S&A has developed several chiller series products, which can meet the cooling requirements need of most fiber laser equipment, CO2 laser equipment, ultraviolet laser equipment and other industrial processing equipment. At the same time, S&A is also constantly improving its products and services, providing high-quality industrial chillers with high performance, high reliability and high energy efficiency for the majority of laser equipment manufacturers.
TEYU S&A Chiller was founded in 2002 with 22 years of chiller manufacturing experience, and now is recognized as a cooling technology pioneer and reliable partner in laser industry.
Copyright © 2021 TEYU S&A Chiller - All Rights Reserved.
