Chiller Troubleshooting
Precise Temperature Control for Laser Systems and Industrial Applications Since 2002
Language
It is one of the common faults that the water-cooled chiller does not cool. How to solve this problem? First of all, we must understand the reasons why the chiller is not cooling, and then quickly solve the fault to restore normal operation. We will analyze this fault from 7 aspects and give you some solutions.
It is one of the common faults that the water-cooled chiller does not cool. How to solve this problem? First of all, we must understand the reasons why the water-cooled chiller is not cooling, and then quickly solve the fault to restore normal operation. We will analyze this fault from 7 aspects and give you some solutions.
1. The use environment of the chiller is harsh.
If the ambient temperature is too high or too low, the air outlet cannot effectively dissipate heat. It is recommended to place the chiller to run at a suitable ambient temperature, which cannot be higher than 40 degrees in summer.
2. The heat exchanger of the chiller is too dirty.
It will reduce the heat dissipation of the cold water and affect the cooling. It is recommended to clean the heat exchanger.
3. The refrigeration system leaks Freon (refrigerant).
Find leaks, repair welding, and add refrigerant.
4. The optional cooling capacity is insufficient.
When the cooling capacity of the chiller is insufficient, the equipment cannot be effectively cooled, and the temperature will be too high. It is recommended to replace the chiller with a suitable cooling capacity.
5. Thermostat failure.
The thermostat is faulty and cannot control the temperature normally, it is recommended to replace the thermostat with a new one.
6、The water temperature probe is faulty.
The water temperature cannot be monitored in real-time and the water temperature value is abnormal. Please replace the probe.
7. Compressor failure.
If the compressor does not work, the rotor is stuck, the speed drops, etc., it needs to be replaced with a new compressor.
The above is the troubleshooting solution for the water-cooled chiller not cooling, sorted out by the Teyu Chiller After-sales Service Center. S&A has rich experience in the production and manufacture of chillers, strictly controls the quality of chillers from the source, reduces the occurrence of failures, and provides more guarantees for our users.
TEYU S&A Chiller was founded in 2002 with 22 years of chiller manufacturing experience, and now is recognized as a cooling technology pioneer and reliable partner in laser industry.
Copyright © 2021 TEYU S&A Chiller - All Rights Reserved.
