Izinhlobo ze-Laser ze-UV ku-Industrial SLA 3D Printers kanye nokucushwa kwama-Laser Chillers

I-Stereolithography (SLA), noma ukuphrinta kwe-3D kwe-resin, kuyinqubo yokukhiqiza engezayo esebenzisa i-laser ye-UV ukwelapha inhlaka ewuketshezi ibe isendlalelo sezinto ze-3D eziqinile ngongqimba. Amaphrinta we-SLA 3D ngokuvamile asebenzisa izinhlobo ezilandelayo zamalaser we-UV:

1. I-UV Gas Lasers

Amalaza egesi afana namalaser angu-325 nm helium-cadmium (HeCd) kanye namalaser angu-351-365 nm argon ion asetshenziswa ekuqaleni kwemishini yokunyathelisa ye-SLA 3D ukuze kuphulukiswe inhlaka enembile kodwa kancane kancane athathelwe indawo ama-lasers asebenza kahle kakhulu ngenxa yezindleko zawo eziphezulu zokunakekela kanye nokuphila okulinganiselwe.

2. I-UV Diode Lasers

Amalaser e-UV diode ngokuvamile akhipha ukukhanya kwe-ultraviolet (405 nm) kumaphrinta we-SLA. Ahlangene, awonga amandla, futhi ashibhile, okuwenza alungele amaphrinta wedeskithophu we-SLA 3D wezinga labathengi kanye nezinhlelo zokusebenza zezimboni ezincane.

3. I-UV Solid-State Lasers

Amalaser e-UV solid-state asetshenziswa kakhulu ezinhlelweni zokuphrinta ze-SLA 3D zezinga eliphezulu lezimboni. Ngokuvamile esebenza ku-355nm, akhiqiza i-laser ye-UV enamandla kakhulu elapha ngokuphumelelayo inhlaka ye-photosensitive ewuketshezi nge-photopolymerization, iqinise ngokushesha ukwakheka kwento. Lawa ma-lasers anikezela ngezinzuzo ezifana nokuminyana kwamandla aphezulu, ukugxila kwe-beam okunembile, ukuzinza kwe-wavelength, nokuphila isikhathi eside.

Amaphrinta amakhulu e-SLA 3D yezimboni ngokuvamile asebenzisa amalaser e-UV enamandla amakhulu, futhi ukusebenza kwezingxenye zawo zokubona kanye ne-laser gain medium kuzwela kakhulu ekushintsheni kwezinga lokushisa. Ukuze uvimbele ukushisa ngokweqile ngesikhathi sokukhishwa kwe-laser yamandla aphezulu, lawa maphrinta e-SLA ajwayele ukuhlonywa ama-laser chiller ukuze apholise ama-laser nezingxenye zokubona, aqinisekise ukuzinza kwemishini nokuthuthukisa ukunemba kokuphrinta nekhwalithi.

Umkhiqizi we-TEYU Chiller unikeza ama-UV Laser Chillers anembile kumaphrinta we-SLA 3D

Ukuze kubhekwane nezinselele zokushisisa ngokweqile kwama-laser e-UV solid-state kumaphrinta efomethi enkulu ye-SLA 3D, i-TEYU Chiller Manufacturer inikeza izixazululo ezithuthukisiwe zokulawula izinga lokushisa. I-TEYU's RMUP-series, CWUL-series kanye ne-CWUP-series laser chillers inikeza ukupholisa okusebenzayo, okuzinzile, nokunembe kakhulu kwama-laseser angu-3W-60W UV, anamandla okupholisa asukela ku-380W kuya ku-4030W kuyilapho izinga lokushisa lizinza okungu-±0.08°C, ±0.01°C kanye no-±0.01°C. Isibonelo, i-TEYU laser chiller CWUL-05 ingasetshenziselwa ukupholisa iphrinta ye-SLA 3D efakwe i-laser yesimo esiqinile engu-3W enobude obungamaza obungu-355 nm. Uma ufuna amaphrinta athembekile we-SLA 3D yezimboni, sicela ukhululeke ukuxhumana nathi.