In order to cool the fiber laser cutter with exchange table,a water chiller system is a MUST.
Last Thursday, Mr. Schmitz, a junior professor from a German scientific research institute on robotics, sent us an e-mail. He said that he visited our booth in the laser fair two years ago and he was quite impressed by our water chiller system CWFL-6000 at that time and now he wanted to know more about this chiller, for his robotics research requires the fiber laser cutter with exchange table. In order to cool the fiber laser cutter with exchange table, a water chiller system is a MUST. So which part of our water chiller system CWFL-6000 impressed Mr. Schmitz most exactly?
Well, according to Mr. Schmitz, he was quite impressed by the cost-effectiveness of water chiller system CWFL-6000. With one chiller, two parts of the fiber laser cutter can be cooled at the same time. Why? Well, that is because S&A Teyu water chiller system CWFL-6000 is designed with dual temperature control system (high & low temperatures) which are applicable to cool the fiber laser source and the cutting head at the same time. In addition, water chiller system is characterized by its intelligent temperature mode, which requires very little manual operation, for the water temperature can adjust itself automatically based on the ambient temperature.
To know more about S&A Teyu water chiller system CWFL-6000, click https://www.teyuchiller.com/industrial-temperature-control-system-cwfl-6000-for-fiber-laser_fl9
