CW-3000 water chiller is developed and produced by S&A Teyu company, it is applied to cool co2 laser.
S&A Teyu CW-3000 is thermoysis type water chiller, it doesn’t have compressor to control the temperature, working like a fan to radiate the heat. It does the heat exchange between the air and the water. The water temperature of cw-3000 chiller is related to ambient temperature, so its thermostat is not manually adjusted.
CW-3000 portable air cooled chillers is energy saving with compact design,stable cooling performance, ease of use and provides good protection for the equipment.
THE WARRANTY IS 2 YEARS AND THE PRODUCT IS UNDERWRITTEN BY INSURANCE COMPANY.
Remarks: CW-3000 portable air cooled chillers equipment are equipped high speed fans inside and take away the heat fast through water recirculation. However, its water temperature is related to the ambient temperature and can't be manually adjusted.
1. Radiating capacity: 50W / °C;
2. Small thermolysis water chiller, energy saving, long working life and simple operation;3. With completed water flow and over high temperature alarm functions;
4. Multiple power specifications; CE ,RoHS and REACH approval.
Note: the working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product.
Independent production of sheet metal and heat exchanger. Fast cooling.
Inlet and outlet connector equipped. Multiple alarm protection.
High speed fan of famous brand installed.
Easy water draining
Connection diagram between water chiller and laser machine
Water outlet of the water tank connects to water inlet of the laser machine while water inlet of the water tank connects to water outlet of the laser machine. Aviation connector of the water tank connects to the aviation connector of the laser machine.
1. To ensure good heat dissipating, please open the lid to clean the dirt after the chiller is used in long-term.
2. Users in cold area should use noncorrosive antifreeze fluid
Method of exchanging water in the water tank
Drain the waste water out of the water tank through the drain outlet and fill the clean water into the tank through the filling hole.
The circulating water should be exchanged every 3 months. The quality of the circulating water will directly influence the service life of the laser tube.It is recommended to use purified water or clean distilled water.
All of S&A Teyu water chillers are certified with design patent. Counterfeiting is not allowed.
The reasons of quality guarantee of S&A Teyu chiller
Compressor in Teyu chiller: adopt compressors from Toshiba, Hitachi, Panasonic and LG etc well-known joint venture brands.
Independent production of evaporator: adopt standard injection molded evaporator to minimize risks of water and refrigerant leakage and improve quality.
Independent production of condenser: condenser is the center hub of industrial chiller. Teyu invested millions in condenser production facilities for the sake of strictly monitoring production process of fin, pipe bending and welding etc to ensure the quality.Condenser production facilities: High Speed Fin Punching Machine, Full Automatic Copper Tube Bending Machine of U Shape, Pipe Expanding Machine, Pipe Cutting Machine.
Independent production of Chiller sheet metal: manufactured by IPG fiber laser cutting machine and welding manipulator. Higher than higher quality is always the aspiration of S&A Teyu
S&A Teyu water chillers CW-3000
S&A Teyu chiller CW-3000 for acrylic machine
S&A Teyu water chiller cw3000 for AD engraving cutting machine
If You Have More Questions, Write To Us
Just leave your email or phone number on the contact form so we can provide you with more services!
Copyright © 2021 S&A Chiller - All Rights Reserved.