loading

industrial chiller cw 3000

You’re in the right place for industrial chiller cw 3000.By now you already know that, whatever you are looking for, you’re sure to find it on TEYU S&A Chiller.we guarantee that it’s here on TEYU S&A Chiller.
The product is soft to touch. Necessary auxiliary treatment such as adding softening agents or softeners is conducted during the treatment of the material. .
We aim to provide the highest quality industrial chiller cw 3000.for our long-term customers and we will actively cooperate with our customers to offer effective solutions and cost benefits.
  • How to replace the cooling fan of the industrial chiller CW 3000?
    How to replace the cooling fan of the industrial chiller CW 3000?
    How to replace the cooling fan for CW-3000 chiller?First, turn off the chiller and unplug its power cord, uncap the water supply inlet, unscrew the fixing screws and remove the sheet metal, cut off the cable tie, distinguish the cooling fan’s wire and unplug it. Take away fixing clips on both sides of the fan, disconnect the fan’s ground wire, untighten the fixing screws to take out the fan from the side. Watch carefully the airfow direction when installing a new fan, don't install it backwards because the wind is blowing out of the chiller. Assemble the parts back the way you disassemble them. It is better to organize wires using a zip cable tie. Lastly, assemble the sheet metal back to finish.What else do you want to know about the maintenance of the chiller? Welcome to leave a message to us.
  • What to do if the flow alarm rings in the industrial chiller CW 3000?
    What to do if the flow alarm rings in the industrial chiller CW 3000?
    What to do if the flow alarm rings in the industrial chiller CW 3000? 10 seconds to teach you to find the causes.Firstly, turn off the chiller, remove the sheet metal, unplug the water inlet pipe, and connect it to the water supply inlet. Turn on the chiller and touch the water pump, its vibration indicates the chiller works normally. Meanwhile, observe the water flow, if the water flow decreases, please immediately contact our after-sales staff.Follow me for more tips on the maintenance of chillers.
  • Industrial Chiller CW 3000 Dust Removal
    Industrial Chiller CW 3000 Dust Removal
    What to do if there is dust accumulation in the industrial chiller CW3000?10 seconds to help you solve this problem. First, remove the sheet metal, then use an air gun to clean the dust on the condenser. The condenser is an important cooling part of the chiller, and periodic dust cleaning is conducive to stable cooling. Follow me for more tips on chiller maintenance.
  • Industrial chiller cw 3000 fan stops rotating
    Industrial chiller cw 3000 fan stops rotating
    What to do if the cooling fan of the chiller CW-3000 does not work?This may be caused by the low ambient temperature. The low ambient temperature keeps the water temperature below 20 ℃, thus leading to its malfunction. You can add some warm water through the water supply inlet, then remove the sheet metal, find the wiring terminal beside the fan, then re-plug the terminal and check the operation of the cooling fan. If the fan is rotating normally, the fault is solved. If it still does not rotate, please immediately contact our after-sales staff.
  • Mini Industrial Water Chiller Unit CW-3000 Applications
    Mini Industrial Water Chiller Unit CW-3000 Applications
    S&A mini industrial water chiller unit CW 3000 is a heat-dissipating chiller, with no compressor and no refrigerant. It uses high-speed fans to quickly dissipate heat to cool down the laser equipment. Its heat dissipation capacity is 50W/℃, meaning it can absorb 50W of heat by rising 1°C of water temperature. With simple structure, convenient operation, space saving, energy saving and environmental protection, mini laser chiller CW 3000 is widely used in cooling CO2 laser engraving and cutting machines. 
CONTACT US
Just tell us your requirements, we can do more than you can imagine.

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English