The first time inject chiller cycling water, or after replacing the water, if a flow alarm occurs, it may be some air in the chiller pipeline that needs to be emptied. In the video is the chiller emptying operation demonstrated by the engineer of S&A laser chiller manufacturer. Hope to help you to deal with the water injection alarm problem.

The circulating water of industrial chillers is generally distilled water or pure water (Don't use tap water because there are too many impurities in it), and it should be replaced regularly. The frequency of circulating water replacement is determined according to the operating frequency and use environment, the low-quality environment is changed once per half a month to a month. the ordinary environment is changed once per three months, and the high-quality environment can change once per year. In the process of replacing the chiller circulating water, the correctness of the operation process is very important. The video is the operation process of replacing the chiller circulating water demonstrated by the S&A chiller engineer. Come and see whether your replacement operation is correct!

How to replace the cooling fan for CW-3000 chiller?First, turn off the chiller and unplug its power cord, uncap the water supply inlet, unscrew the fixing screws and remove the sheet metal, cut off the cable tie, distinguish the cooling fan’s wire and unplug it. Take away fixing clips on both sides of the fan, disconnect the fan’s ground wire, untighten the fixing screws to take out the fan from the side. Watch carefully the airfow direction when installing a new fan, don't install it backwards because the wind is blowing out of the chiller. Assemble the parts back the way you disassemble them. It is better to organize wires using a zip cable tie. Lastly, assemble the sheet metal back to finish.What else do you want to know about the maintenance of the chiller? Welcome to leave a message to us.

X Action Codename: Destroy the 6000W Fiber Laser ChillerX Action Time: Boss Is AwayX Action Location: Guangzhou Teyu Electromechanical Co., Ltd.Today’s target is to destroy the S&A Chiller CWFL-6000. Be sure to complete the task.S&A 6000W Fiber Laser Chiller Waterproof Test. Turned on the 6000W fiber laser chiller and repeatedly splashed water on it, but it is too strong to destroy. It still boots normally.Finally, the mission failed!

How the 3000W fiber laser chiller is made?First is the laser cutting process of the steel plate, after which is the bending sequence, and then the anti-rust coating treatment. After the bending technique by the machine, the stainless steel pipe will form a coil, which is the evaporator part of the chiller. With other core cooling parts, the evaporator will be assembled on the bottom sheet metal. Then install the water inlet and outlet, weld the pipe connection part, and fill the refrigerant. Then rigorous leak detection tests are performed. Assemble a qualified temperature controller and other electric components. The computer system will automatically follow up the completion of each progress. Parameters are set and water is injected, and the charging test is then made. After a series of strict room temperature tests, plus the high temperature tests, the last is the exhaustion of residual moisture. Finally, a 3000W fiber laser chiller is completed.

S&A chiller manufacturer has been focusing on industrial chiller manufacturing for 20 years and has developed several chiller production lines, 90+ products can be used in 100+ manufacturing and processing industries.S&A has a Teyu quality control system, which strictly controls and manages the supply chain, full inspection on key components, standardized technique implementation, and overall performance testing. Strives to provide users with efficient, stable and reliable laser cooling tools to create a good product experience.

Guangzhou Teyu Electromechanical Co., Ltd. was established in 2002, and has been committed to the research and development, production and sales of chillers, and has 20 years of industrial manufacturing experience. From 2002 to 2022, the product ranged from only a single series to more than 90 models of multiple series today, the market has been sold to more than 50 countries and regions around the world from China to today, and the shipment volume has exceeded 100,000 units. S&A focuses on the laser processing industry, constantly develops new products according to the temperature control requirements of laser equipment, provides customers with high-quality and efficient chiller products and services, and contributes to the chiller industry and even the entire laser manufacturing industry!

S&A industrial laser chiller CWFL series products have good performance in the cooling systems of various laser processing equipment. They can effectively control the temperature of the laser and ensure its continuous and stable operation. The upgraded CWFL PRO series laser chillers have obvious advantages.

As the shell of the industrial water chiller, sheet metal is an important part, and its quality greatly affects users' using experience. The sheet metal of Teyu S&A chiller has undergone multiple processes such as laser cutting, bending processing, anti-rust spraying, pattern printing, etc. The finished S&A sheet metal shell is both good-looking and stable. To see the sheet metal quality of S&A industrial chiller more intuitively, S&A engineers conducted a small chiller withstand weight test. Let's watch the video together.