Having watched the previous CWUP-40 Chiller Temperature Stability Test, a follower commented that it is not accurate enough and he suggested to test with scorching fire. S&A Chiller Engineers quickly accepted this good idea and arranged a “HOT TORREFY ” experience for the chiller CWUP-40 to test its ±0.1℃ temperature stability. First to prepare a cold plate and connect the chiller water inlet & outlet pipes to the cold plate’s pipelines. Turn on the chiller and set the water temperature at 25℃, then paste 2 thermometer probes on the water inlet and outlet of the cold plate, ignite the flame gun to scorch the cold plate. The chiller is working and the circulating water quickly takes away the heat from the cold plate. After 5-minute burning, the temperature of chiller inlet water rises to about 29℃ and can not go up anymore under the fire. After 10 seconds off the fire, the chiller inlet and outlet water temperature quickly drop to about 25℃, with temperature difference stable...

Recently, a laser processing enthusiast has bought the high-power and ultrafast S&A laser chiller CWUP-40. Having opened the package after its arrival, they unscrew the fixed brackets on the base to test whether the temperature stability of this chiller can reach ±0.1℃. The lad unscrews the water supply inlet cap and fills pure water to the range within the green area of the water level indicator. Open the electrical connecting box and connect the power cord, install the pipes to the water inlet and outlet port and connect them to a discarded coil. Put the coil in the water tank, place one temperature probe in the water tank, and paste the other to the connection between the chiller water outlet pipe and the coil water inlet port to detect the temperature difference between the cooling medium and chiller outlet water. Turn on the chiller and set the water temperature to 25℃. By changing the water temperature in the tank, the chiller temperature control ability can be tested. Aft...