TEYU CW-6000 Water Chiller for CO2 Laser Cutting and Wood Engraving

CO₂ laser cutting and engraving machines are widely used for processing wood, plywood, acrylic, and other non-metallic materials. Whether cutting intricate patterns or engraving detailed designs, stable laser output is essential for consistent results, especially during extended operation.
The application shown here pairs a TEYU CW-6000 industrial water chiller with a CO₂ laser cutting machine used for sheet-material processing. The CW-6000 chiller provides continuous temperature-controlled cooling for the CO₂ laser source, helping maintain stable operating conditions throughout the job.

Stable Cooling for Wood Laser Cutting and Engraving
During continuous operation, a CO₂ laser generates heat that needs to be effectively removed. Excessive heat or temperature fluctuations can affect laser operating stability and may contribute to inconsistent processing performance.
TEYU CW-6000 CO₂ laser chiller uses a closed-loop refrigeration system to circulate cooled water through the laser source. With a 3.14 kW cooling capacity, ±0.5°C temperature stability, and a 5–35°C temperature control range, it is designed for CO₂ laser systems requiring active and reliable cooling.
For woodworking applications, this means the laser can maintain more consistent thermal conditions while the machine performs cutting or engraving tasks.

Designed for Continuous Laser Processing
Wood laser cutting often involves repeated cutting, engraving, and detailed pattern processing. A chiller therefore needs to provide more than basic heat removal—it needs to maintain cooling performance as the laser continues to operate.
TEYU CW-6000 chiller features intelligent temperature control and multiple protection functions to support reliable day-to-day operation. Its closed-loop design also helps reduce the need for frequent water replacement compared with simpler cooling approaches.
The chiller is installed alongside the laser machine, with cooling water circulated between the CW-6000 and the CO₂ laser source. This makes it a practical solution for integrating temperature control into a complete laser processing system.

A Practical CO₂ Laser Chiller for Woodworking Applications
For manufacturers and users of wood laser cutting and engraving machines, choosing a chiller should be based on the laser source, heat load, required cooling capacity, water flow, and operating environment.
TEYU CW-6000 chiller is one option for CO₂ laser systems requiring approximately 3 kW of cooling capacity. Its compact integrated design and dedicated laser cooling configuration make it suitable for applications including wood cutting, wood engraving, signage production, crafts, and other non-metallic laser processing.

With more than two decades of experience in industrial chiller manufacturing, TEYU provides cooling solutions for a wide range of laser processing equipment.
Need help selecting a chiller for CO₂ laser cutting or engraving machine? Contact TEYU at sales@teyuchiller.com with your laser model and power, and our team can recommend a suitable cooling solution.