When E6 alarm occurs to industrial cooling laser water chiller which cools laser fabric cutter, that means there is a water flow alarm. Why it appear and how to deal with it? Well, below tips might be helpful to you.
1.The external circulating water channel of the industrial laser cooler is blocked. In this case, make sure it is clear;
2.The internal circulating water channel of the chiller is blocked. Under this circumstance, use some clean water to flush and use the air gun to blow the channel;
3.There is particle inside the water pump, so it need to be cleaned;
4.The rotor inside the water pump wears down and it leads to the aging of the water pump. In this case, change for a new water pump.
After 18-year development, we establish rigorous product quality system and provide well-established after-sales service. We offer more than 90 standard water chiller models and 120 water chiller models for customization. With cooling capacity ranging from 0.6KW to 30KW, our water chillers are applicable to cool different laser sources,laser processing machines, CNC machines, medical instruments, laboratory equipment and so on.
