loading
News
VR

Advantages of UV laser cutting FPC circuit boards

FPC flexible circuit boards can greatly reduce the size of electronic products and play an irreplaceable role in the electronics industry. There are four cutting methods for FPC flexible circuit boards, compared with CO2 laser cutting, infrared fiber cutting and green light cutting, UV laser cutting has more advantages.

July 14, 2022

FPC flexible circuit boards can greatly reduce the size of electronic products and play an irreplaceable role in the electronics industry. There are four cutting methods for FPC flexible circuit boards, CO2 laser cutting, UV ultraviolet laser cutting, infrared fiber cutting and green light cutting.

Compared with other laser cutting, UV laser cutting has more advantages. For example, the CO2 laser wavelength is 10.6μm, and the spot is large. Although its processing cost is relatively low, the laser power provided can reach several kilowatts, but a large amount of heat energy is generated during the cutting process, which causes the processing edge heat loss and causing a severe carbonization phenomenon.

The wavelength of the UV laser is 355nm, which is easy to optically focus on and has a fine spot. The spot diameter of the UV laser with a laser power of fewer than 20 watts is only 20μm after focusing. The energy density produced is even comparable to the surface of the sun, with no significant thermal effects, and the cutting edge is clean, neat, and burr-free for better and more precise results.

Ultraviolet laser cutting machine, the commonly used laser power range is between 5W-30W, and an external laser chiller is required to provide cooling for the laser. The laser chiller keeps the operating temperature of the laser within an appropriate range using water-cooling circulation, to avoid damage to the laser caused by the inability to effectively dissipate heat due to long-term work. Different cutting machines have different requirements for water temperature of industrial chillers. The water temperature can be set through the thermostat (the water temperature can be set between 5 and 35°C) to meet the different needs of the cutting machine for water temperature. The improvement of the intelligent application of the chiller supports the Modbus RS-485 communication protocol, which can remotely monitor the water temperature and adjust the water temperature parameters.

There are also cabinet-type UV laser chillers, which can be inserted into the laser cutting cabinet, which is convenient to move with the cutting machine and saves installation space.


6U Rack Mount Chiller RMUP-500 for UV Laser Ultrafast Laser 220V

Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Send your inquiry

Choose a different language
English
العربية
Deutsch
Español
français
italiano
日本語
한국어
Português
русский
简体中文
繁體中文
Afrikaans
አማርኛ
Azərbaycan
Беларуская
български
বাংলা
Bosanski
Català
Sugbuanon
Corsu
čeština
Cymraeg
dansk
Ελληνικά
Esperanto
Eesti
Euskara
فارسی
Suomi
Frysk
Gaeilgenah
Gàidhlig
Galego
ગુજરાતી
Hausa
Ōlelo Hawaiʻi
हिन्दी
Hmong
Hrvatski
Kreyòl ayisyen
Magyar
հայերեն
bahasa Indonesia
Igbo
Íslenska
עִברִית
Basa Jawa
ქართველი
Қазақ Тілі
ខ្មែរ
ಕನ್ನಡ
Kurdî (Kurmancî)
Кыргызча
Latin
Lëtzebuergesch
ລາວ
lietuvių
latviešu valoda‎
Malagasy
Maori
Македонски
മലയാളം
Монгол
मराठी
Bahasa Melayu
Maltese
ဗမာ
नेपाली
Nederlands
norsk
Chicheŵa
ਪੰਜਾਬੀ
Polski
پښتو
Română
سنڌي
සිංහල
Slovenčina
Slovenščina
Faasamoa
Shona
Af Soomaali
Shqip
Српски
Sesotho
Sundanese
svenska
Kiswahili
தமிழ்
తెలుగు
Точики
ภาษาไทย
Pilipino
Türkçe
Українська
اردو
O'zbek
Tiếng Việt
Xhosa
יידיש
èdè Yorùbá
Zulu
Current language:English