News
Get In Touch With Us
News
TEYU S&A Chiller is a chiller manufacturer that has 24 years of experience in designing, manufacturing and selling laser chillers. We have been focusing on the news of various laser industries such as laser cutting, laser welding, laser marking, laser engraving, laser printing, laser cleaning, etc. Enriching and improving the TEYU S&A chiller system according to the cooling needs changes of laser equipment and other processing equipment, providing them with a high-quality, high-efficient and environmentally friendly industrial water chiller.
PVC is a common material in daily life, with high plasticity and non-toxicity. The heat resistance of PVC material makes processing difficult, but the high-precision temperature-controlled ultraviolet laser brings PVC cutting into a new direction. UV laser chiller helps UV laser process PVC material stably.
2023
01
07
Recently, a laser processing enthusiast has bought the high-power and ultrafast S&A laser chiller CWUP-40. Having opened the package after its arrival, they unscrew the fixed brackets on the base to test whether the temperature stability of this chiller can reach ±0.1℃. The lad unscrews the water supply inlet cap and fills pure water to the range within the green area of the water level indicator. Open the electrical connecting box and connect the power cord, install the pipes to the water inlet and outlet port and connect them to a discarded coil. Put the coil in the water tank, place one temperature probe in the water tank, and paste the other to the connection between the chiller water outlet pipe and the coil water inlet port to detect the temperature difference between the cooling medium and chiller outlet water. Turn on the chiller and set the water temperature to 25℃. By changing the water temperature in the tank, the chiller temperature control ability can be tested. Aft...
2022
12
27
What are the reasons for the blurred marking of the laser marking machine? There are three main reasons: (1) There are some problems with the software setting of the laser marker; (2) The hardware of the laser marker is working abnormally; (3) The laser marking chiller is not cooling properly.
2022
12
27
When using the laser cutting machine, regular maintenance testing as well as every-time check is needed so that problems can be found and solved promptly to avoid the chances of machine failure during the operation, and to confirm whether the equipment works stably. So what is the necessary work before the laser cutting machine is turned on? There are 4 main points: (1)Check the whole lathe bed; (2)Check the cleanliness of the lens; (3)Coaxial debugging of the laser cutting machine; (4)Check the laser cutting machine chiller status.
2022
12
24
Traditional metal cutting mold has long been adopted for battery electrode plate cutting of NEV. After being used for a long time, the cutter may wear, resulting in unstable process and poor cutting quality of the electrode plates. Picosecond laser cutting solves this problem, which not only improves product quality and working efficiency but also reduces comprehensive costs. Equipped with S&A ultrafast laser chiller that can keep long-term stable operation.
2022
12
16
Maybe you forgot to add antifreeze. First, let’s see the performance requirement on antifreeze for chiller and compare various types of antifreeze on the market. Obviously, these 2 are more suitable. To add antifreeze, we must first understand the ratio. Generally, the more antifreeze you add, the lower the freezing point of water, and the less likely it is to freeze. But if you add too much, its antifreezing performance will decrease, and it is pretty corrosive. Your need to prepare the solution in proper proportion based on the winter temperature in your region.Take the 15000W fiber laser chiller as an example, the mixing ratio is 3:7(Antifreeze: Pure Water) when used in the region where the temperature is not lower than -15℃. First to take 1.5L of antifreeze in a container, then add 3.5L of pure water for 5L mixing solution. But the tank capacity of this chiller is about 200L, actually it needs around 60L antifreeze and 140L pure water to fill in after intensive mixing. Calculate...
2022
12
15
X Action Codename: Destroy the 6000W Fiber Laser Chiller X Action Time: Boss Is AwayX Action Location: Guangzhou Teyu Electromechanical Co., Ltd.Today's target is to destroy the S&A Chiller CWFL-6000. Be sure to complete the task.S&A 6000W Fiber Laser Chiller Waterproof Test. Turned on the 6000W fiber laser chiller and repeatedly splashed water on it, but it is too strong to destroy. It still boots normally. Finally, the mission failed!
2022
12
09
Do you know how to upkeep your industrial water chiller in cold winter? 1. Keep the chiller in a ventilated position and remove the dust regularly. 2. Replace circulating water at regular intervals. 3. If you don't use the laser chiller in winter, drain the water and store it properly. 4. For areas below 0℃, antifreeze is needed for chiller operation in winter.
2022
12
09
What are the applications of laser technology in building materials? At present, hydraulic shearing or grinding machines are mainly used for rebar and iron bars used in building foundations or structures. Laser technology is mostly used in the processing of pipes, doors and windows.
2022
12
09
Smartphones set off the first round of demand for precision laser processing. So where the next round of demand upsurge in precision laser processing may be? Precision laser processing heads for high end and chips may become the next wave of craze.
2022
11
25
The laser cutting machine protection lens can protect the internal optical circuit and core parts of the laser cutting head. The cause of the burnt-out protective lens of the laser cutting machine is improper maintenance and the solution is to select a suitable industrial cooler for the heat dissipation of your laser equipment.
2022
11
18
How is the 3000W fiber laser chiller made? First is the laser cutting process of the steel plate, after which is the bending sequence, and then the anti-rust coating treatment. After the bending technique by the machine, the stainless steel pipe will form a coil, which is the evaporator part of the chiller. With other core cooling parts, the evaporator will be assembled on the bottom sheet metal. Then install the water inlet and outlet, weld the pipe connection part, and fill the refrigerant. Then rigorous leak detection tests are performed. Assemble a qualified temperature controller and other electric components. The computer system will automatically follow up the completion of each progress. Parameters are set and water is injected, and the charging test is then made. After a series of strict room temperature tests, plus the high temperature tests, the last is the exhaustion of residual moisture. Finally, a 3000W fiber laser chiller is completed.
2022
11
10
no data
Copyright © 2026 TEYU S&A Chiller | Sitemap Privacy policy