TEYU Chiller, S&a Chiller's Co2 Laser Cooler

When selecting a water chiller for cooling a 1500W fiber laser cutting machine, there are several key factors to consider:

1. Cooling Capacity: The chiller must have sufficient cooling capacity to handle the heat load generated by the laser. For a 1500W fiber laser cutter, it needs to have a cooling capacity of around 3-5 kW of the cooling equipment.

2. Temperature Stability: Precision in temperature control is crucial for maintaining the performance and lifespan of the laser. Look for water chillers that offer precise temperature stability of at least ± 1 ℃.

3. Refrigerant Type: Ensure the water chiller uses an environmentally friendly refrigerant. Common options include R-410A and R-134a.

4. Pump Performance: The pump should be able to provide adequate flow and pressure to the laser system. Check the pump's flow rate (L/min) and pressure (bar).

5. Noise Level: Consider the noise level of the water chiller, especially if it will be located in a work environment where noise could be a concern.

6. Reliability and Maintenance: Choose a reputable water chiller brand known for reliability and ease of maintenance. Availability of spare parts and technical support is also important.

7. Energy Efficiency: Energy-efficient water chillers can save on operational costs in the long run.

8. Footprint and Installation: Consider the physical size of the water chiller and its installation requirements to ensure it fits well within your space constraints.










TEYU Water Chiller CWFL-1500 for 1500W Fiber Laser Cutter






TEYU Water Chiller CWFL-1500 for 1500W Fiber Laser Cutter






TEYU Water Chiller CWFL-1500 for 1500W Fiber Laser Cutter









Based on these considerations, here is a recommended water chiller brand for you: TEYU water chiller CWFL-1500, which is specifically designed by TEYU S&A Water Chiller Maker for cooling 1500W fiber laser cutting machines.

1. Specialization:

Designed for Fiber Lasers: The Water Chiller CWFL-1500 is specifically engineered to cool 1500W fiber lasers, ensuring optimized performance and compatibility.

Integrated Solutions: This chiller model offers specialized cooling solutions tailored to the needs of high-power fiber lasers, ensuring stable operation.

2. Cooling Capacity:

Matching Capacity: The Water Chiller CWFL-1500 is designed to handle the specific heat load generated by a 1500W fiber laser, ensuring efficient and effective cooling for the 1500W fiber laser cutting machine.

3. Dual Temperature Control System:

Two Cooling Circuits: The Water Chiller CWFL-1500 features dual temperature control circuits, providing precise temperature control for both the fiber laser source and the optics, which is critical for maintaining the overall performance and longevity of the laser system.

4. Built-in Features:

Alarm Functions: The CWFL-1500 includes built-in alarm functions for flow rate, temperature, and pressure, which can help prevent damage to the laser and reduce downtime.

Ease of Integration: This water chiller is designed to be easily integrated with 1500W fiber laser systems, minimizing installation complexity.





TEYU S&A Chiller is a world-renowned chiller maker and chiller supplier, specializing in water chillers for 22 years. TEYU CWFL-1500 water chiller is specifically designed for 1500W fiber laser cutting machines, making it the most suitable choice for your application. Its specialized design, dual temperature control system, and tailored features for fiber lasers will ensure optimal performance, reliability, and protection for your laser system.

Laser marking is a non-contact technique with no contamination and no damage and with the ability to integrate with the computer technology. It is one of the most widely used laser techniques in the current market. Laser marking projects high energy and high density laser light on the subject so that the surface of the subject will evaporate or change color to form permanent markings. It is characterized by high precision, wide application, no consumable, high efficiency and no pollution.

Global laser marking market analysis

Since laser marking technique was first invented in 1970s, it has been developing very rapidly. By 1988, laser marking has become one of the biggest applications, taking up 29% of the total global industrial applications. In industrially developed countries, laser marking technique has successfully combined with CNC technique and flexible manufacturing technique, creating multi-function laser marking systems. And more and more laser marking machine manufacturers appear, such as Control Laser Corp from the United States and NEC from Japan. They many years of experience of R&D and their laser marking machines have a high level of automation and practicability, so their machines are very popular among the users.

Laser marking machine is one of the most early applied laser technique. Early in 1995, the leading laser marking machine manufacturer Gravotech entered the laser marking market. And for domestic laser marking machine supplier Hans Laser which was founded in 1996 also started its business in button laser marking machine. As the laser technique becomes more and more mature and the global economy develops stably, laser marking machines are in stable demand in material processing, communication, medical, instruments and other industries. And the global laser marking market scale is also developing stably. According to the authorized data, the global laser marking market scale in 2020 reached 2.7 billion US dollars while the annual compound growth rate in 2014-2020 was around 5.6%.

Domestic laser marking market analysis

In the late 70s and early 80s, domestic professional manufacturers which produce laser processing systems appeared. And in the 90s, as laser technique and computer technique developed, the laser marking machines became more and more well-established.

By the time of 2020, the laser marking machines of some of the domestic manufacturers had been almost as good as those of the oversea manufacturers. At the same time, since domestic laser marking machines were less expensive than the oversea ones, they were more competitive in certain areas,such as automobile parts, electronics, medical equipment and gifts.

However, as domestic laser marking machines are having lower and lower prices, the competition becomes fiercer and fiercer and some of the manufacturers only have 5% of net profit. In this situation, quite a lot of laser marking machine manufacturers search for the new directions. One is shifting from domestic market to oversea market. Second is adding high additive value product line such as laser cutting, laser welding and laser cleaning machines. Third is to abandon the medium-low end market and focus on the customization market and the high end market.

As domestic laser marking machines are heading towards high-end direction, their accessories need to catch up with the latest technology. And as the core accessory, laser cooler needs to be as precise as possible. S&A CWUP series circulating water chillers are known for their precise temperature control of ±0.1℃ and small footprint. Plus, they even support Modbus485-communication protocol to allow remote control. Find out more information about CWUP series laser coolers at https://www.teyuchiller.com/ultrafast-laser-uv-laser-chiller_c3

Before users first start the industrial water cooler to cool the glass laser cutting machine, they may have such a question: What kind of water is ideal for industrial water cooler? Well, purified water or clean distilled water is the ideal water, for they contain the least particles and impurities and are not easy to cause blocking inside the water channel. 








After 18-year development, we establish rigorous product quality system and provide well-established after-sales service. We offer more than 90 standard water chiller models and 120 water chiller models for customization. With cooling capacity ranging from 0.6KW to 30KW, our water chillers are applicable to cool different laser sources,laser processing machines, CNC machines, medical instruments, laboratory equipment and so on.

The current fiber laser cutting machines are becoming more and more advanced and intelligent. They can not only process plate materials but also tube materials. What’s more, they can reduce much human labor. The versatility of fiber laser cutting machine is the reason why it attracts so many users, including Mr. Abdul from Egypt. 




Last year, Mr. Abdul expanded his business to plate & tube fiber laser cutting service for the local industrial companies. In addition to several plate&tube fiber laser cutting machines, he also purchased 5 units of S&A Teyu high power industrial water chiller systems CWFL-3000. This year, he repurchased 10 units and told us that the business growth increased by 30% in the second quarter of this year comparing with the same period of last year and his business thrived is part of the result of the stable cooling provided by high power industrial water chiller system CWFL-3000. 



S&A Teyu high power industrial water chiller system CWFL-3000 is designed with dual temperature control system applicable to cool fiber laser device and the QBH connector/optics at the same time. Besides, it supports Modbus-485 communication protocol, which can realize the remote monitoring the industrial water chiller system and the laser cutting machine. With this intelligent industrial water chiller system, stable cooling can be provided for the plate&tube fiber laser cutting machines in time. 




For more information about S&A Teyu high power industrial water chiller system CWFL-3000, click https://www.chillermanual.net/high-power-industrial-water-chillers-cwfl-3000-for-3000w-fiber-lasers_p21.html 

A German user reported that abnormal water flow occurred to the water chiller machine which cools keyboard laser marking machine. According to the experience of S&A Teyu, this is due to the clogging inside the waterway of the water chiller machine or water leakage. Users need to find out whether it occurs to external waterway or internal waterway. They can also turn to the chiller supplier for detailed solutions. 





In respect of production, S&A Teyu has invested the production equipment of more than one million RMB, ensuring the quality of a series of processes from the core components (condenser) of industrial chiller to the welding of sheet metal; in respect of logistics, S&A Teyu has set up logistics warehouses in the main cities of China, having greatly reduced the damage due to the long-distance logistics of the goods, and improved transport efficiency; in respect of after-sales service, all the S&A Teyu water chillers are underwritten by insurance company and the warranty period is two years.