![Aikace-aikacen yanke Laser a fannin FPC 1]()
A fannin lantarki, FPC an san ta da "kwakwalwar" nau'ikan kayayyakin lantarki iri-iri. Ganin cewa na'urorin lantarki sun fi siriri, ƙanana, masu sauƙin ɗauka da kuma naɗewa, FPC wanda ke da yawan wayoyi masu yawa, nauyi mai sauƙi, sassauci mai yawa da kuma ikon haɗa 3D zai iya magance ƙalubalen kasuwar lantarki.
A cewar rahoton, ana sa ran girman masana'antar fannin FPC zai kai dala biliyan 301 a shekarar 2028. Yanzu haka fannin FPC yana samun ci gaba mai sauri na dogon lokaci, kuma a halin yanzu, dabarun sarrafa FPC suma suna da sabbin abubuwa.
Hanyoyin sarrafa FPC na gargajiya sun haɗa da yanke kayan aiki, V-CUT, injin niƙa kayan aiki, mashin bugawa, da sauransu. Amma duk waɗannan suna cikin dabarun sarrafa hulɗa ta injiniya waɗanda ke haifar da damuwa, ƙura, da kuma haifar da ƙarancin daidaito. Tare da duk waɗannan matsalolin, ana maye gurbin irin waɗannan hanyoyin sarrafawa a hankali ta hanyar dabarun yanke laser.
Yanke Laser dabara ce ta yankewa ba tare da taɓawa ba. Tana iya nuna haske mai ƙarfi (650mW/mm2) a kan ƙaramin wuri mai ma'ana (100~500μm). Ƙarfin hasken laser yana da yawa har ana iya amfani da shi don yankewa, haƙawa, yin alama, sassaka, walda, rubutu, tsaftacewa, da sauransu.
Yankewar Laser yana da fa'idodi da yawa wajen yanke FPC. Ga wasu daga cikinsu.
1. Tunda yawan wayoyi da kuma girman kayayyakin FPC sun fi yawa kuma tsarin FPC yana ƙara rikitarwa, yana ƙara fuskantar ƙalubale ga yin mold na FPC. Duk da haka, tare da dabarun yanke laser, ba ya buƙatar sarrafa mold, don haka ana iya adana kuɗi mai yawa na haɓaka mold.
2. Kamar yadda aka ambata a baya, sarrafa injina yana da matsaloli da yawa waɗanda ke iyakance daidaiton sarrafawa. Amma tare da injin yanke laser, tunda yana da ƙarfin aiki ta hanyar tushen laser UV mai ƙarfi wanda ke da ingancin hasken haske mai kyau, aikin yankewa na iya zama mai gamsarwa sosai.
3. Tunda dabarun sarrafa kayan gargajiya suna buƙatar hulɗa ta inji, tabbas suna haifar da damuwa ga FPC, wanda zai iya haifar da lalacewa ta jiki. Amma tare da dabarar yanke laser, tunda dabarar sarrafa kayan ba ta taɓawa ba ce, tana iya taimakawa wajen hana kayan lalacewa ko lalacewa.
Da zarar FPC ta ƙara ƙanƙanta da sirara, wahalar sarrafawa a kan irin wannan ƙaramin yanki yana ƙaruwa. Kamar yadda aka ambata a baya, injin yanke laser na FPC sau da yawa yana amfani da tushen laser na UV a matsayin tushen haske. Yana da daidaito sosai kuma ba zai yi lahani ga FPC ba. Don kiyaye kyakkyawan aiki, injin yanke laser na FPC UV sau da yawa yana zuwa tare da ingantaccen injin sanyaya iska.
Injin sanyaya iska na S&A CWUP-20 yana ba da babban matakin daidaiton sarrafawa na ±0.1℃ kuma yana zuwa tare da matsewa mai ƙarfi don tabbatar da ingantaccen aikin sanyaya. Masu amfani za su iya saita zafin ruwan da ake so ko kuma su bar zafin ruwan ya daidaita kansa ta atomatik, godiya ga mai sarrafa zafin jiki mai wayo. Nemo ƙarin bayani game da wannan injin sanyaya iska a https://www.teyuchiller.com/portable-water-chiller-cwup-20-for-ultrafast-laser-and-uv-laser_ul5
![sanyaya tsarin sanyaya iska]( "sanyaya tsarin sanyaya iska")
